Traction motor refers to an electric motor providing the primary rotational torque of a machine, usually for conversion into linear motion (traction).

Traction motors are used in electrically powered rail vehicles such as electric multiple units and electric locomotives, other electric vehicles such as electric milk floats, elevators and conveyors as well as vehicles with electrical transmission systems such as diesel-electric and electric hybrid vehicles. Additionally, electric motors in other products (such as the main motor in a washing machine) are described as traction motors.

Contents 1 Transportation applications 1.1 Rail vehicles 1.2 Road vehicles 2 Rating 3 Cooling 4 Manufacturers 5 See also 6 External links

[edit] Transportation applications

[edit] Rail vehicles

Traditionally, these are DC series-wound motors, usually running on approximately 600 volts. The availability of high-powered semiconductors (such as thyristors and the IGBT) has now made practical the use of much simpler, higher-reliability AC induction motors known as asynchronous traction motors. Synchronous AC motors are also occasionally used, as in the French TGV.

Before the mid-20th century, a single large motor was often used to drive multiple driving wheels through connecting rods that were very similar to those used on steam locomotives. See for example the Pennsylvania Railroad DD1, the PRR L5 and the various Swiss Crocodiles. It is now standard practice to provide one traction motor driving each axle through a gear drive.

Usually, the traction motor is simply suspended between the truck (bogie) frame and the driven axle; this is referred to as a "nose-suspended traction motor". The problem with such an arrangement is that a portion of the motor's weight is unsprung, increasing forces on the track. Occasionally, other mounting arrangements are made. In the case of the GG1, two truck-mounted motors drove each axle through a quill drive. The "Bi-Polar" electric locomotives built by General Electric for the Milwaukee Road had gearless motors. The rotating shaft of the motor was also the axle for the wheels. In the case of the TGV power units, a motor mounted to the power unit’s frame drives each axle; a "tripod" drive allows a small amount of flexibility in the drive train allowing the trucks (bogies) to pivot. By mounting the relatively heavy traction motor directly to the power unit rather than to the truck (bogie), better dynamics are obtained allowing much-improved high-speed operation.

[edit] Road vehicles

Traditionally road vehicles (cars, buses and trucks) have used diesel and petrol engines with a mechanical or hydraulic transmission system. In the latter part of the 20th century, vehicles with electrical transmission systems (powered from both combustion engines and/or batteries or fuel cells) began to be developed - one advantage of using electric motors is that specific types can regenerate energy (ie act as a dynamo) - providing braking as well as increasing overall efficiency.

[edit] Rating

In diesel-electric and gas turbine-electric locomotives the horsepower rating of the traction motors is usually 81% that of the prime mover[1][2]. This assumes that the electrical generator converts 90% of the engine's output into electrical energy and the traction motors convert 90% of this electrical energy back into mechanical energy. Calculation: 90% × 90% = 81%.

[edit] Cooling

Because of the high power levels involved, traction motors are almost always cooled using forced air.

[edit] Manufacturers

[edit] See also

• Air cooling
• Electric vehicle battery
• Induction motor
• Rare earths
• Torque and speed of a DC motor
• Virtual transmission

v • d • e Electric motors Broad Motor Categories Synchronous motor • AC motor • DC motor Conventional Electric Motors Induction • Brushed DC • Brushless DC • Stepper • Linear • Unipolar • Reluctance Novel Electric Motors Ball bearing • Homopolar • Piezoelectric • Ultrasonic • Electrostatic • Switched Reluctance Motor Controllers Adjustable-speed drive • Amplidyne • Direct torque control • Direct on line starter • Electronic speed control • Metadyne • Motor controller • Variable-frequency drive • Vector control • Ward Leonard control • Thyristor drive See also Barlow's Wheel • Nanomotor • Traction motor • Lynch motor • Mendocino motor • Repulsion motor • Inchworm motor • Booster (electric power) • Brush (electric) • Electrical generator • Alternator

[edit] External links

• "Deconstructing a traction motor - Associated Rewinds (Ireland) Limited"
• Image of a nose mounted traction motor on an R46 New York City Subway car. The motor can be clearly seen behind the axle with the gear box with the writing on it in the center.
• Another nose mounted traction motor on a wrecked R38 Subway car.
• Coney Island Truck Repair shop; many pictures regarding traction motors
• Detached truck with Traction Motors.
• Hi-Torque Electric
• Information About Electric Vehicles