This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (October 2007)

An anti-eyebrow piercing is an example of a surface piercing

Surface piercings are any body piercings that take place on the surface sewn into the body through areas which are not particularly concave or convex, where the piercing canal transverses a surface flap of skin, rather than running completely through a piece of body tissue from one side to another. A surface bar follows the plane of skin, while a standard piercing is pierced through the plane.

Sometimes surface piercings are difficult to heal, because, as the body rejects the body jewelry as a foreign object, the jewellery is pushed to the surface, causing the piercing to grow out.^[1] Proper placement and jewellery selection by an experienced body piercer can help alleviate this problem. A well done surface can last anywhere between 3 months and several years.

[edit] Types of Piercings

Some more common, surface piercings are:

• Corset piercing, a series of bilaterally symmetrical piercings, normally done on the back, intended to be laced like a corset.
• Madison piercing, a horizontal piercing located just above the collarbone, at the base of the neck.
• Vertical Tragus, in front of the ear through the tragus.
• Nape piercing, located on the back of the neck.
• Neck piercing, located on the side of the neck. (Also called 'Vampire Bites')
• Hip piercing, located on the pelvis near the hips bones.
• Hand web piercing, located in the webbing between any of the fingers on the hand.
• Sternum piercing, located vertically or horizontally on the sternum.
• Wrist piercing, located on or near the wrist, generally on the upper side.
• Stomach piercing, anywhere on stomach but is usually close to the navel.^{[citation needed]}
• Knuckles
• Finger
• Clavicle
• Anti-eyebrow

Contrast these surface piercings with some common non-surface piercings:

• Ear piercing, located through either earlobe or any part of the cartilage of either ear.
• Nasal septum piercing, located through the thin membrane in the nasal cavity directly below the cartilage that makes up the nasal septum.
• Nostril piercing, located through the fold of skin comprising either nostril.

[edit] Rejection

Given the choice, the body doesn't want foreign objects inside itself, and that includes piercings. Rejection occurs when it is "easier" for the body to push the piercing out like a splinter than it is to heal a fistula (skin tunnel) around it. Rejection is common among surface piercings as well as navel piercings and eyebrow piercings among others.

Rejection is affected by placement, blood flow, irritation and abuse, as well as your general health. The healthier you are, the less likely you are to have problems.

[edit] Cleaning

To help decrease the chance of rejection, cleaning a surface piercing is a good idea. The best way to clean it is to use a saline solution, and put it on a cotton swab and rub the area around the piercing then let air dry. Be careful not to agitate the piercing. The piercing should be cleaned a few times a day for the first few weeks.

[edit] References

[edit] External links

• BMEZine page on Surface Piercing Rejection - Explanation of various types of surface piercing techniques and rejection with several photos of piercings in the process of being rejected.
• Body piercing aftercare