This article includes a list of references, related reading or external links, but its sources remain unclear because it lacks inline citations. Please improve this article by introducing more precise citations where appropriate. (August 2009)

Strapping, also known as bundling, is the process of applying a strap to an item to combine, hold, reinforce, or fasten it. The strap may also be referred to as strapping. Strapping is most commonly used in the packaging industry.

Contents 1 Types of strap 1.1 Steel 1.2 Polypropylene 1.3 Polyester 1.4 Nylon 1.5 Corded and woven 1.6 Paper 1.7 Composite 2 Uses of strapping 3 Joining methods 4 Equipment 5 References 5.1 Citations 5.2 Books 5.3 Related standards

[edit] Types of strap

Strap is a flexible flat material, most commonly made from steel or various plastics.

[edit] Steel

Steel is the oldest and highest tensile strength strapping. It is available in a variety of widths and thicknesses as well as variations in the grade of steel. Steel is used for heavy duty holding where high strength and minimal stretch are desired. Steel strap can have a surface finish of paint, paint and wax, or zinc and wax; the wax is used to better transmit the tension around the bundle and for use with certain types of tensioners Common applications include steel coils, baling, bricks and pavers, and roll end-binding.

[edit] Polypropylene

Polypropylene strap (oriented or tensilized) is an economical material designed for light to medium duty unitizing, palletizing and bundling. It is available in various widths, thicknesses, and polymer variations (e.g., copolymers). Some polypropylene is embossed or printed. This product offers high elongation at break but tends to have irrecoverable dead stretch with constant stress.

[edit] Polyester

Oriented or tensilized polyester and nylon are the strongest plastic strapping products and are used as a viable alternative to steel strapping in the some industries. Polyester provides excellent retained tension to stay tight on rigid loads. Its excellent recovery properties help a load absorb impact without strap breakage.

There are specialized types available for specific applications. For instance, in cold climates a strap bonded in hot melt glue is used because it is weather-proof.^{[citation needed]}

[edit] Nylon

Nylon strap has the greatest specific strength of the three plastics, however it is rarely used due to its high price. In the past nylon strap used to be very popular, but over time polyester has replaced almost all of its use. One application that still uses this type of strap is cold room applications, because it does not creep as much as the other types of plastic.

[edit] Corded and woven

Corded and woven strapping are available in several constructions, primarily involving polyester and rayon. Some types are reusable. Because this system uses a buckle for a joint, corded and woven strapping can have a larger system strength than steel banding. Corded polyester strapping also has a higher elongation than other strapping systems, which gives it an ideal memory for sea and rail shipments. Because corded and woven polyester is light and soft, it is also a safer alternative to steel banding.

[edit] Paper

Paper strap is used to strap paper products between industrial processes. This allows the bundle to be introduced into the process without the need to cut the straps, which can lead to the product falling apart prematurely.^[1]

[edit] Composite

Composite strapping has [[filament]s embedded in it. In the load securing industry it is often referred to as “synthetic steel”. It is very abrasion resistant and has the highest joint efficiency when used with a buckle. Both advantages are not affected by climate.^{[citation needed]}

[edit] Uses of strapping

Examples include:

• Bundling items together for handling and shipment: newspapers, pipe, lumber, concrete block, etc.
• Attaching items to pallets, skids, and crates
• Reinforcing wooden boxes, crates, and corrugated boxes, such as gaylords
• Attaching items to flatcars, flatbed semi-trailers,
• Securing a unit load of bricks, packaged glass, metal parts, etc.
• Closing corrugated boxes and shipping containers
• Securing coils of steel or paper
• Holding bales of agricultural products or textiles
• Load securing items within intermodal containers, boxcars, and semi-trailers

Strapping is most often used in complete horizontal or vertical bands. Edge protectors are used to help spread the load at corners and reduce damage to the load by the tensioned strap. Strapping can also be used in loops attached to holding locations on rail cars, skids, etc.

[edit] Joining methods

After the strap is tensioned, the strap is often sealed to itself. Steel strap is sealed with a seal and notch joint, a seal and crimp, seal-less joint, or via welding. Seals come in various shapes depending on the application; some can be put on after the strap is tensioned, while others must be installed before tensioning. To create the seal, the seal and strap are notched on both sides; if one set of notches are created then it is called a single notch joint, if two sets of notches are created then its called a double notch joint. Crimp joints also use a seal, but crimp undulations are used instead of formed notches. These crimps form great frictional forces which keep the joint from seeping. Seal-less joints are created by forming interlocking keys into the middle of the strap.

Plastic strap is most commonly joined by melting the straps together by adding heat to the joint. For lighter gauge strap, usually 16 mm (0.63 in) and narrower, heat is introduced with a hot knife system. First, the hot knife moves in between the straps. Then a platen comes up and compresses the straps and hot knife against an anvil on the order of tens of milliseconds (centiseconds). The platen then drops and the hot knife is removed. After the hot knife is completely clear of the straps the platen comes back up and compresses the joint so that the melted portions of the strap mix together and harden.

For thicker plastic strap, usually 12 mm (0.47 in) and wider, friction is used to create heat within the joint. The process starts with the strap compressed between the platen and the anvil. There is a vibrator built into either the platen or the anvil, which has teeth; there are also teeth on the opposite component that does not move. The vibrator is quickly vibrated which induces great friction between the two straps and melts the joint. To complete the weld the vibrator is stopped and the pressure held until the joint has solidified.

It may also be joined manually by crimping a seal or via a buckle.

[edit] Equipment

There are two major types of equipment available for strapping: hand tools and strapping machines. A dispenser is used with both types of equipment to dispense the strap. Some strapping machines have the dispenser built-in, others have a separate powered dispenser, which can automatically load or thread new coils. Non-powered separated dispensers have a pulley which releases and activates a brake to stop the inertia of the coil to keep the strap from over-running onto the floor. Dispensers used on strapping machines have multiple pulleys to act as a way to store strap in a way that can be quickly dispensed. This is required otherwise the strapping machine will draw the strap faster than the dispenser can pay off.

Within hand tools there are manual and automatic tools. Manual tensioners and crimping systems are available for low volume applications. Automatic hand tools are used for higher volume applications. Automatic tools are available using a battery power source or compressed air. Both manual and automatic tools are available as combination tools, which perform the tensioning, sealing and cutting, or as separate tensioners, sealers, and cutters. Manual sealers for plastic strap always use a seal and a crimp joint. Manual and automatic hand sealers for steel can use a seal or a seal-less joint. Automatic hand for plastic strap use a friction weld.

Strapping machines, also known as bundlers, are used for high volume applications or special applications. They are available in horizontal and vertical orientations, however the vertical orientation is far more common. They are also available in bottom seal, side seal, and top seal orientations, which define where the joint is located on the bundle. They are available in semi-automatic and automatic varieties. The automatic versions are designed to be used inline with conveyor systems. A photoeye is used to detect when the bundle is in the correct location, stop the conveyors, and activate the strapping machine.

[edit] References

[edit] Citations

[edit] Books

• Brody, A. L., and Marsh, K, S., "Encyclopedia of Packaging Technology", John Wiley & Sons, 1997, ISBN 0-471-06397-5

[edit] Related standards

• ASTM D3953 Standard Specification for Strapping, Flat Steel and Seals
• ASTM D3950 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
• ASTM D4675 Standard Guide for Selection and Use of Flat Strapping Materials