Star 48 Information & Star 48 Links at HealthHaven.com
advertise
add site
services
publishers
database
health videos
Bookmark and Share

search wiki for    ?
web dir firms image gallery news pdf wiki shop video 
about
toolbar
stats
live show
health store
more stuff
JOIN/LOGIN
Featured Results:
USA Sports 48 " Lat Bar (GLB-48) US$30Web Direct Brands -
USA Sports 48" Lat Bar (GLB-48) US$30Web Direct Brands -
bestbuyfitness.com
 Store | Product Details: 48 " Wide Superstax Equipment Pieces -...
Store | Product Details: 48" Wide Superstax Equipment Pieces -...
dentalrecord.com
 ...
...
fammed.usouthal.edu
 

The Star 48 is a type of solid rocket motor used by both the Space Shuttle and the New Horizons probe. It is used almost exclusively as an upper stage. It was developed primarily by Thiokol Propulsion, and now manufactured by ATK.

The "-48" designation refers to the approximate diameter of the fuel casing in inches; Thiokol had also manufactured other motors such as the Star-37 and Star-40. Internally, Thiokol's designation was TE-M-711 for early versions, and TE-M-799 for later ones. Subtypes are given one or more letter suffixes after the diameter number, or a trailing number (i.e., "-2") after the internal designation. Not surprisingly, the "T" prefix stands for Thiokol, and the following letter refers to the company division that developed the rocket motor. In this case, "E" refers to the Elkton,Md division.

The most common use of the Star-48 is as the final stage of the Shuttle and Delta II launch vehicles. Other launchers have also incorporated the motor, but with lower frequency. In such usage, the complete stage (motor plus accessories) is referred to as PAM, Payload Assist Module, as the Shuttle could only take satellites to Low Earth Orbit. Because Geostationary orbit is much more lucrative, the additional stage was needed for the final leg of the journey. On such missions, the stage is spin-stabilized. A turntable, mounted in the shuttle payload bay or atop the previous Delta stage, spun the PAM and payload to approximately 60 rpm prior to release.

Usually after motor burnout and just prior to satellite release the PAM is de-spun using a Yo-Yo de-spin technique.

A non-spinning, thrust-vectoring version of the Star-48 is available ("Star-48V"), but much less common.

A Star-48 engine used in the 3rd stage of the New Horizons probe will be the first part of the New Horizons mission to reach Jupiter orbit, arriving before the probe.[1] It will eventually cross Pluto orbit in 2015, but will miss the planet itself by 200 million kilometres.

Saudi inspectors at the crash site of a Star-48 Payload Assist Module in January, 2001.

A Star-48 Payload Assist Module crashed in the Saudi Arabian desert in January 2001, after its orbit decayed. The unit did not burn up on reentry and was positively identified on the ground.[2]

[edit] References

  1. ^ Derelict Booster to Beat Pluto Probe to Jupiter
  2. ^ "PAM-D Debris Falls in Saudi Arabia." The Orbital Debris Quarterly News. Vol. 6, Issue 2. NASA Johnson Space Center. Available online.



Product Results (view all...)

search wiki for    ?
web dir firms image gallery news pdf wiki shop video 



↑ top of page ↑about thumbshots