Physical Layer Information & Physical Layer Links at HealthHaven.com

The OSI Model
7. Application Layer
	NNTP · SIP · SSI · DNS · FTP · Gopher · HTTP · NFS · NTP · SMPP · SMTP · SNMP · Telnet (more)
6. Presentation Layer
	MIME · XDR · SSL · TLS
5. Session Layer
	Named Pipes · NetBIOS · SAP
4. Transport Layer
	TCP · UDP · PPTP · L2TP · SCTP
3. Network Layer
	IP · ICMP · IPsec · IGMP
2. Data Link Layer
	ARP · CSLIP · SLIP · Frame relay · ITU-T G.hn DLL
1. Physical Layer
	RS-232 · V.35 · V.34 · I.430 · I.431 · T1 · E1 · Ethernet · POTS · SONET/SDH · OTN · DSL · 802.11a/b/g/n PHY · ITU-T G.hn PHY
	This box: view • talk • edit

OSI Model
7	Application Layer
6	Presentation Layer
5	Session Layer
4	Transport Layer
3	Network Layer
2	Data Link Layer LLC sublayer; MAC sublayer;
1	Physical Layer

The Physical Layer is the first and lowest layer in the seven-layer OSI model of computer networking.

The Physical Layer consists of the basic hardware transmission technologies of a network. It is a fundamental layer underlying the logical data structures of the higher level functions in a network. Due to the plethora of available hardware technologies with widely varying characteristics, this is perhaps the most complex layer in the OSI architecture. The implementation of this layer is often termed PHY.

The Physical Layer defines the means of transmitting raw bits rather than logical data packets over a physical link connecting network nodes. The bit stream may be grouped into code words or symbols and converted to a physical signal that is transmitted over a hardware transmission medium. The Physical Layer provides an electrical, mechanical, and procedural interface to the transmission medium. The shapes and properties of the electrical connectors, the frequencies to broadcast on, the modulation scheme to use and similar low-level parameters, are specified here.

Within the semantics of the OSI network architecture, the Physical Layer translates logical communications requests from the Data Link Layer into hardware-specific operations to effect transmission or reception of electronic signals.

[edit] Physical signaling sublayer

In a local area network (LAN) or a metropolitan area network (MAN) using open systems interconnection (OSI) architecture,the physical signaling sublayer is the portion of the Physical Layer that:

interfaces with the medium access control sublayer (MAC) which is a part of the Data Link Layer
performs character encoding, transmission, reception and decoding.
performs mandatory isolation functions.^[1]

[edit] List of Physical Layer services

The major functions and services performed by the Physical Layer are:

Bit-by-bit or symbol-by-symbol delivery
Providing a standardized interface to physical transmission media, including
- Mechanical specification of electrical connectors and cables, for example maximum cable length
- Electrical specification of transmission line signal level and impedance
- Radio interface, including electromagnetic spectrum frequency allocation and specification of signal strength, analog bandwidth, etc.
- Specifications for IR over optical fiber or a wireless IR communication link
Modulation
Line coding
Bit synchronization in synchronous serial communication
Start-stop signalling and flow control in asynchronous serial communication
Circuit switching
Multiplexing
- Establishment and termination of circuit switched connections
Carrier sense and collision detection utilized by some level 2 multiple access protocols
Equalization filtering, training sequences, pulse shaping and other signal processing of physical signals
Forward error correction^[2] for example bitwise convolutional coding
Bit-interleaving and other channel coding

The Physical Layer is also concerned with

Bit rate
Point-to-point, multipoint or point-to-multipoint line configuration
Physical network topology, for example bus, ring, mesh or star network
Serial or parallel communication
Simplex, half duplex or full duplex transmission mode
Autonegotiation

[edit] Physical Layer examples

Telephone network modems- V.92
IRDA Physical Layer
USB Physical Layer
EIA RS-232, EIA-422, EIA-423, RS-449, RS-485
Ethernet physical layer Including 10BASE-T, 10BASE2, 10BASE5, 100BASE-TX, 100BASE-FX, 100BASE-T, 1000BASE-T, 1000BASE-SX and other varieties
Varieties of 802.11 Wi-Fi Physical Layers
DSL
ISDN
T1 and other T-carrier links, and E1 and other E-carrier links
SONET/SDH
GSM Um radio interface physical layer
Bluetooth Physical Layer
ITU Recommendations: see ITU-T
Firewire
TransferJet Physical Layer
Etherloop
ARINC 818 Avionics Digital Video Bus
G.hn/G.9960 Physical Layer

[edit] Hardware equipment (network node) examples

[edit] Relation to TCP/IP model

The TCP/IP model, defined in RFC 1122 and RFC 1123, is a high-level networking description used for the Internet and similar networks. It does not define an equivalent layer that deals exclusively with hardware-level specifications, as this model does not concern itself directly with physical interfaces. It specifies a functioning host operating system with a facility to transmit packets onto the local network via a local area network encapsulation method (e.g., RFC 1042).^[3] and simply absorbs all hardware specific components of the operating system and interface firmware into the Link Layer without detailed specifications. The TCP/IP model is not a top/down comprehensive design reference for general networks and networking hardware, but an architecural description of the suite of methods and requirements used in the Internet Protocol Suite to achieve internetworking between disparate local area networks.

[edit] See also

[edit] References

^ This article incorporates public domain material from the General Services Administration document "Federal Standard 1037C".
^ Bersekas, Dimitri; Gallager, Robert (1992). Data Networks. Prentice Hall. p. 61. ISBN 0-13-200916-1.
^ RFC 1122, Requirements for Internet Hosts -- Communication Layers, R. Braden, IETF, 1989

[edit] External links

[0] This article incorporates public domain material from the General Services Administration document "Federal Standard 1037C".

[1] Bersekas, Dimitri; Gallager, Robert (1992). Data Networks. Prentice Hall. p. 61. ISBN 0-13-200916-1.

[2] RFC 1122, Requirements for Internet Hosts -- Communication Layers, R. Braden, IETF, 1989

[1]

[2]

[3]

Contents