Pentane Information & Pentane Links at HealthHaven.com

n-Pentane
IUPAC name	pentane
Other names	n-pentane; amyl hydride; Skellysolve A
Identifiers
CAS number	109-66-0
PubChem	8003
RTECS number	RZ9450000
SMILES	CCCCC
InChI	1/C5H12/c1-3-5-4-2/h3-5H2,1-2H3
ChemSpider ID	7712
Properties
Molecular formula	C5H12
Molar mass	72.15 g/mol
Appearance	Colourless liquid
Density	0.626 g/cm³, liquid
Melting point	−129.8 °C (143 K)
Boiling point	36.1 °C (308 K)
Solubility in water	0.004 g/100 mL (20 °C)
Acidity (pKa)	~45
Viscosity	0.240 cP at 20 °C
Hazards
MSDS	External MSDS
R/S statement	R: R12, R51/53, R65,; R66, R67; S: (S2), S9, S16,; S29, S33, S61, S62
NFPA 704	4 1 0
Flash point	−49 °C
Related compounds
Related alkanes	Butane, Isopentane,; Neopentane, Hexane
Related compounds	Cyclopentane
Supplementary data page
Structure and; properties	n, εr, etc.
Thermodynamic; data	Phase behaviour; Solid, liquid, gas
Spectral data	UV, IR, NMR, MS
	(what is this?) (verify); Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
	Infobox references

Pentane is an organic compound with the formula C₅H₁₂ — that is, an alkane with five carbon atoms. The term may refer to any of three structural isomers, or to a mixture of them:

Common name	normal pentane unbranched pentane n-pentane	isopentane	neopentane
IUPAC name	pentane	methylbutane	dimethylpropane
Molecular diagram
Skeletal diagram

In the IUPAC nomenclature, however, pentane means exclusively the n-pentane isomer; the other two being called "methylbutane" and "dimethylpropane".

Pentanes are components of some fuels and are employed as a specialty solvents in the laboratory. Their properties are very similar to those of butanes and hexanes.

[edit] Industrial uses

Pentane is one of the primary blowing agents used in the production of polystyrene foam.

Due to its low boiling point, low cost, and relative safety, pentane is used as a working medium in geothermal power stations.

[edit] Laboratory use

Pentanes are relatively inexpensive and are the most volatile alkanes that are liquid at room temperature, so they are often used in the laboratory as solvents that can be conveniently evaporated. However, because of their nonpolarity and lack of functionality, they can only dissolve non-polar and alkyl-rich compounds. Pentanes are miscible with most common nonpolar solvents such as chlorocarbons, aromatics, and ethers. They are also often used in liquid chromatography.

[edit] Physical properties

Isomer	M. P. (°C)^[2]	B. P. (°C)^[2]	Dens (g/l)^[2]
n-pentane	-129.8	36.0	621
isopentane	-159.9	27.7	616
neopentane	-16.6	9.5	586

The boiling points of the pentane isomers range from about 9 to 36 °C. As is the case for other alkanes, the more branched isomers tend to have lower boiling points.

On the other hand, the melting point of isopentane is only 30°C higher than that of n-pentane, but that of neopentane is more than 100°C above isopentane. The anomaly has been attributed to the better solid-state packing assumed to be possible with the tetrahedral neopentane molecule; but this explanation has been challenged on account of it having a lower density than the other two isomers.^[2]

The branched isomers are more stable (have lower heat of formation and heat of combustion) than normal pentane. The difference is 1.8 kcal/mol for isopentane, and 5 kcal/mol for neopentane.^[3]

Rotation about two central single C-C bonds of n-pentane produces four different conformations.^[4]

[edit] Reactions

All pentane isomers burn with oxygen to form carbon dioxide and water:

C₅H₁₂ + 8 O₂ → 5 CO₂ + 6 H₂O

As with other hydrocarbons, pentanes undergo free radical chlorination:

C₅H₁₂ + Cl₂ → C₅H₁₁Cl + HCl

Such reactions are unselective; with n-pentane, the result is a mixture of the 1-, 2-, and 3-chloropentanes, as well as more highly chlorinated derivatives. Other radical halogenations can also occur.

While n-butane is the conventional feedstock in the production of maleic anhydride, n-pentane is also a substrate:

CH₃CH₂CH₂CH₂CH₃ + 5 O₂ → C₂H₂(CO)₂O + 5 H₂O + CO₂

[edit] References

^ Itrust.de
^ ^a ^b ^c ^d James Wei (1999), Molecular Symmetry, Rotational Entropy, and Elevated Melting Points. Ind. Eng. Chem. Res., volume 38 issue 12, pp. 5019–5027 {{doi:10.1021/ie990588m}}
^ From the values listed at Standard enthalpy change of formation (data table).
^ Roman M. Balabin (2009). "Enthalpy Difference between Conformations of Normal Alkanes: Raman Spectroscopy Study of n-Pentane and n-Butane". J. Phys. Chem. A 113 (6): 1012. doi:10.1021/jp809639s.

[edit] External links

International Chemical Safety Card 0534 at ILO.org
NIOSH Pocket Guide to Chemical Hazards at CDC.gov
Material safety data sheet for Pentane at Ox.ac.uk
Phytochemical data for pentane at Ars-grin.gov

[0] Itrust.de

[Wei-1] James Wei (1999), Molecular Symmetry, Rotational Entropy, and Elevated Melting Points. Ind. Eng. Chem. Res., volume 38 issue 12, pp. 5019–5027 {{doi:10.1021/ie990588m}}

[2] From the values listed at Standard enthalpy change of formation (data table).

[Balabin_2009-3] Roman M. Balabin (2009). "Enthalpy Difference between Conformations of Normal Alkanes: Raman Spectroscopy Study of n-Pentane and n-Butane". J. Phys. Chem. A 113 (6): 1012. doi:10.1021/jp809639s.

[1]

[2]

[3]

[4]