Partial molar property Information & Partial molar property Links at HealthHaven.com

Partial molar properties are thermodynamic quantities which indicate how any extensive property of a solution or mixture varies with changes in the molar composition of the mixture at constant temperature and pressure. Every extensive property of a mixture has a corresponding partial molar property.

[edit] Definition

The partial molar volume is broadly understood as the contribution that a component of a mixture makes to the overall volume of the solution. However, there is rather more to it than this:

When one mole of water is added to a large volume of water at 25 ºC, the volume increases by 18 cm³. The molar volume of pure water would thus be reported as 18 cm³ mol^-1. However, addition of one mole of water to a large volume of pure ethanol results in an increase in volume of only 14 cm³. The reason that the increase is different is that the volume occupied by a given number of water molecules depends upon the identity of the surrounding molecules. The value 14 cm³ is said to be the partial molar volume of water in ethanol.

In general, the partial molar volume of a substance X in a mixture is the change in volume per mole of X added to the mixture.

The partial molar volumes of the components of a mixture vary with the composition of the mixture, because the environment of the molecules in the mixture changes with the composition. It is the changing molecular environment (and the consequent alteration of the interactions between molecules) that results in the thermodynamic properties of a mixture changing as its composition is altered

If, by $Z$ , one denotes a generic extensive property of a mixture, it will always be true that it depends on the pressure ( $P$ ), temperature ( $T$ ), and the amount of each component of the mixture (measured in moles, n). For a mixture with m components, this is expressed as

$Z=Z(T,P,n_1,n_2,\cdots).$

Now if temperature T and pressure P are held constant, $Z=Z(n_1,n_2,\cdots)$ is a homogeneous function of degree 1, since doubling the quantities of each component in the mixture will double $Z$ . More generally, for any $λ$ :

$Z(\lambda n_1,\lambda n_2, \cdots)=\lambda Z(n_1,n_2,\cdots).$

By Euler's first theorem for homogeneous functions, this implies

$Z=\sum _{i=1}^m n_i \bar{Z_i},$

where $\bar{Z_i}$ is the partial molar $Z$ of component $i$ defined as:

$\bar{Z_i}=\left( \frac{\partial Z}{\partial n_i} \right)_{T,P,n_{j\neq i}}.$

By Euler's second theorem for homogeneous functions, $\bar{Z_i}$ is a homogeneous function of degree 0 which means that for any $λ$ :

$\bar{Z_i}(\lambda n_1,\lambda n_2,\cdots )=\bar{Z_i}(n_1,n_2,\cdots ).$

In particular, taking $λ = 1 / n T$ where $n_T=n_1+n_2+ \cdots$ , one has

$\bar{Z_i}(x_1,x_2, \cdots )=\bar{Z_i}(n_1,n_2,\cdots),$

where $x_i=\frac{n_i}{n_T}$ is the concentration, or mole fraction of component $i$ . Since the molar fractions satisfy the relation

$\sum _{i=1}^m x_i = 1,$

the x_i are not independent, and the partial molar property is a function of only $m - 1$ mole fractions:

$\bar{Z_i}=\bar{Z_i}(x_1,x_2, \cdots , x_{m-1}).$

The partial molar property is thus an intensive property - it does not depend on the size of the system.

[edit] Applications

Partial molar properties are useful because chemical mixtures are often maintained at constant temperature and pressure and under these conditions, the value of any extensive property can be obtained from its partial molar property. They are especially useful when considering specific properties of pure substances (that is, properties of one mole of pure substance) and properties of mixing. By definition, properties of mixing are related to those of the pure substance by:

$z^M=z-\sum_i x_iz^*_i.$

Here $*$ denotes the pure substance, $M$ the mixing property, and $z$ corresponds to the specific property under consideration. From the definition of partial molar properties,

$z=\sum_i x_i \bar{Z_i},$

substitution yields:

$z^M=\sum_i x_i(\bar{Z_i}-z_i^*).$

So from knowledge of the partial molar properties, properties of mixing can be calculated.

[edit] Relationship to thermodynamic potentials

Partial molar properties satisfy relations analogous to those of the extensive properties. For the internal energy U, enthalpy H, Helmholtz free energy A, and Gibbs free energy G, the following hold:

$\bar{H_i}=\bar{U_i}+P\bar{V_i},$

$\bar{A_i}=\bar{U_i}-T\bar{S_i},$

$\bar{G_i}=\bar{H_i}-T\bar{S_i},$

where $P$ is the pressure, $V$ the volume, $T$ the temperature, and $S$ the entropy.

[edit] Differential form of the thermodynamic potentials

The thermodynamic potentials also satisfy

$dU= TdS-PdV+\sum_i \mu_i dn_i,\,$

$dH= TdS+VdP+\sum_i \mu_i dn_i,\,$

$dA=-SdT-PdV+\sum_i \mu_i dn_i,\,$

$dG=-SdT+VdP+\sum_i \mu_i dn_i,\,$

where $μ i$ is the chemical potential defined as (for constant n_j with j≠i):

$\mu_i=\left( \frac{\partial U}{\partial n_i}\right)_{S,V}=\left( \frac{\partial H}{\partial n_i}\right)_{S,P}=\left( \frac{\partial A}{\partial n_i}\right)_{T,V}=\left( \frac{\partial G}{\partial n_i}\right)_{T,P}.$

This last partial derivative is the same as $\bar{G_i}$ , the partial molar Gibbs free energy energy. This means that the partial molar Gibbs free energy and the chemical potential, one of the most important properties in thermodynamics and chemistry, are the same quantity. Under isobaric (constant P) and isothermal (constant T ) conditions, knowledge of the chemical potentials, $\mu_i(x_1,x_2,\cdots , x_m)$ , yields every property of the mixture as they completely determine the Gibbs free energy.

[edit] Calculating partial molar properties

To calculate the partial molar property $\bar{Z_1}$ of a binary solution, one begins with the pure component denoted as $2$ and, keeping the temperature and pressure constant during the entire process, add small quantities of component $1$ ; measuring $Z$ after each addition. After sampling the compositions of interest one can fit a curve to the experimental data. This function will be $Z (n 1)$ . Differentiating with respect to $n 1$ will give $\bar{Z_1}$ . $\bar{Z_2}$ is then obtained from the relation: