This article discusses imaging of three-dimensional objects. For an abstract mathematical discussion, see Projection (linear algebra).

It has been suggested that Cabinet projection and Cavalier projection be merged into this article or section. (Discuss)

Part of a series on:

Graphical projection

Planar Parallel projection Orthographic projection Multiviews Plan, or floor plan Section Elevation Auxiliary Axonometric projection Isometric projection Dimetric projection Trimetric projection Oblique projection Cavalier projection Cabinet projection Perspective projection Linear perspective One-point perspective Two-point perspective Three-point perspective Zero-point perspective Curvilinear perspective Reverse perspective

Other 3D projection Stereographic projection Anamorphic projection

Views Bird's-eye view/Aerial view Detail view 3/4 perspective Cutaway drawing Exploded view drawing Fisheye Fixed 3D Panorama Top-down perspective Worm's-eye view Zoom

Topics Computer graphics Computer-aided design Descriptive geometry Engineering drawing Foreshortening Map projection Projective geometry Technical drawing Vanishing point

v • d • e

Oblique projection is a simple type of graphical projection used for producing pictorial, two-dimensional images of three-dimensional objects.

[edit] Overview

Oblique projection with foreshortening by half, seen from the side.

Oblique projection is a type of parallel projection:

• it projects an image by intersecting parallel rays (projectors)
• from the three-dimensional source object with the drawing surface (projection plan).

In both oblique projection and orthographic projection, parallel lines of the source object produce parallel lines in the projected image. The projectors in oblique projection intersect the projection plane at an oblique angle to produce the projected image, as opposed to the perpendicular angle used in orthographic projection.

Mathematically, the parallel projection of the point (x,y,z) on the xy-plane gives (x + az,y + bz,0). The constants a and b uniquely specify a parallel projection. When a = b = 0, the projection is said to be "orthographic" or "orthogonal". Otherwise, it is "oblique". The constants a and b are not necessarily less than 1, and as a consequence lengths measured on an oblique projection may be either larger or shorter than they were in space. In a general oblique projection, spheres of the space are projected as ellipses on the drawing plane, and not as circles as you would expect them from an orthogonal projection.

Oblique drawing is also the crudest "3D" drawing method but the easiest to master. Oblique is not really a 3D system but a 2 dimensional view of an object with 'forced depth'. One way to draw using an oblique view is to draw the side of the object you are looking at in two dimensions, i.e. flat, and then draw the other sides at an angle of 45 degrees, but instead of drawing the sides full size they are only drawn with half the depth creating 'forced depth' - adding an element of realism to the object. Even with this 'forced depth', oblique drawings look very unconvincing to the eye. For this reason oblique is rarely used by professional designer and engineers.

[edit] Oblique pictorial

Potting bench drawn in cabinet projection: an oblique projection with an angle of 30° and a ratio of 0.5.

In an oblique pictorial drawing, the angles displayed among the axes, as well as the foreshortening factors (scale) are arbitrary. More precisely, any given set of three coplanar segments originating from the same point may be construed as forming some oblique perspective of three sides of a cube. This result is known as Pohlke's theorem, from the German mathematician Pohlke, who published it in the early 19th century. ^[1]

The resulting distortions make the technique unsuitable for formal, working drawings. Nevertheless, the distortions are partially overcome by aligning one plane of the image parallel to the plane of projection. Doing so creates a true shape image of the chosen plane. This specific category of oblique projections, whereby lengths along the directions x and y are preserved, but lengths along direction z are drawn at angle using a reduction factor is very much in use for industrial drawings.

• Cavalier projection is the name of such a projection, where the length along the z axis remains unscaled.^[2]

• Cabinet projection, popular in furniture illustrations, is an example of such a technique, wherein the receding axis is scaled to half-size ^[2] (sometimes also two thirds the original^{[citation needed]}).

[edit] Examples

Besides technical drawing and illustrations, video games (especially those preceding the advent of 3D games) also often use a form of oblique projection. Examples include SimCity, Ultima VII, EarthBound, and Paperboy.

[edit] See also

• Cabinet projection
• Orthographic projection
• Plans (drawings)
• Graphical projection
• Projection (linear algebra)
• Parallel (geometry)
• Space-oblique Mercator projection

[edit] References

This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (March 2009)

[edit] Further reading

Wikimedia Commons has media related to: Oblique projection

Foley, James (1997). Computer Graphics. Boston: Addison-Wesley. ISBN 0201848406.