A multiphasic liquid is a mixture consisting of more than two immiscible liquid phases. Biphasic mixtures consisting of two immiscible phases are very common and usually consist of an organic solvent and an aqueous phase ("oil and water"). Multiphasic liquids are rare and only triphasic (three phases) and tetraphasic (four phases) are known. The largest number of immiscible phases obtained is eight.

Multiphasic liquids can be used for selective liquid-liquid extractions or for decorative purposes, e.g. in cosmetics.

While it is possible to get multilayered phases by layering nonpolar and aqueous phases of decreasing densities on top of each other, these phases will not separate after mixing like true multiphasic liquids.

Contents 1 Compositions 1.1 Triphasic systems 1.2 Tetraphasic systems 2 See also 3 External links

[edit] Compositions

The following types of multiphasic liquids exist:

[edit] Triphasic systems

• Nonpolar solvent / aqueous biphasic mixture

  e.g. using hexane, heptane, cyclohexane, or mineral oil as the nonpolar solvent

  • Nonpolar solvent / polar solvent / salt / water

    e.g. 100 ml mineral oil, 100 ml isopropanol, 75 ml water, 35 g calcium chloride

  • Nonpolar solvent / water-soluble polymer A, water-soluble polymer B, water

    e.g. hexane, polyethylene oxide, dextran, water

  • Nonpolar solvent / water-soluble polymer / salt / water

    e.g. hexane, polyethylene oxide, sodium sulfate, water

  • Nonpolar solvent A / solvent B / polymer soluble in solvent B and water / water

    e.g. heptane, dichloromethane, polyethylene oxide, water

• Nonpolar solvent A / solvent B / polymer soluble in solvent B and water / salt / water

  e.g. 16.3% heptane, 21.7% dichloromethane, 9.5% polyethylene oxide, 51.5% water, 0.1% sodium sulfate

• Nonpolar solvent / hydrophobic salt / water

  e.g. iso-octane, Aliquat 336 (methyltrioctylammonium chloride, a phase transfer catalyst), water [1]

  • or: cyclohexane, bmim-PF₆ (an ionic liquid), water [2]

[edit] Tetraphasic systems

• Nonpolar solvent A / solvent B / polymer soluble in solvent B and water / salt / water

  e.g. 10.9% heptane, 15.5% dichloromethane, 7.1% polyethylene oxide, 66.5% sodium sulfate (> 0.1%) in water

[edit] See also

• Separating funnel

[edit] External links

• Chem. Commun. 1998, 787 Polymer induced multiphase generation in water/organic solvent mixtures. Strategies towards the design of triphasic and tetraphasic liquid systems (pdf)
• US patent application 20050215443 Multiphase aqueous cleansing composition