This article may need to be wikified to meet Wikipedia's quality standards. Please help by adding relevant internal links, or by improving the article's layout. (December 2008)

This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (December 2008)

A Hand-Over is a term used in the animation industry to refer to the process of adding hand and finger motion capture data to pre-existing full-body motion capture data using a hand motion capture device. This is usually done by playing back the full-body data while simultaneously recording the hand and finger data. This is similar to a voice actor doing a voice-over for animated characters.

There are very few full-body motion capture systems that can capture full hand and finger motion data at the same time as the full body. An optical system gets accurate data using reflective markers and high resolution cameras. However, if the cameras can't see the markers the cameras can't measure the markers. Mounting the many reflective markers on each individual joint of the hand so that they stay within the camera's views is difficult.

The traditional method of adding hand and finger motion is to key frame the fingers. This is a process similar to the old claymation process. Move the finger, record the frame, move the finger again, record the frame. Key framing is easier using animation software where you can set up a beginning position and an ending position, then let the software fill in the motion in between. Even though software makes this easy it still takes a very talented artist to get realistic hands using the key frame method.

Another method of adding hand and finger motion is to have the animator or actor wear a data glove or wired glove. These devices very accurately measure and record the position and bend of each finger, thumb, and even the hand. Measurand's ShapeHand is made of flexible ribbons and includes 40 Fiber Optic bend/twist sensors.

Using a hand motion capture device an animator can play back the full-body data from any system and record the hand motion. This is typically done in a software package that can simultaneously play motion capture data while recording new motion capture data. This requires some practice to get the timing right just as it takes practice to get the timing right when a voice actor does an animation voice-over.

Hand-overs can save time and money while increasing the realism in hand and finger animation. This is not done without controversy. Traditional key framers do not agree this type of motion capture is better than their craft.

[edit] See also

• voice-over
• Motion Capture
• Computer Animation

[edit] References

• Jin & Hahn, "Adding Hand Motion to the Motion Capture Based Character Animation" Computer Science Department, George Washington University, ISVC 2005, LNCS 3804, pp. 17 – 24.
• Motion Capture Resources
• Siggraph