Group →	4
↓ Period
4	22 Ti
5	40 Zr
6	72 Hf
7	104 Rf
Legend Transition metal Primordial element Synthetic

The Group 4 elements are a group of chemical elements in the periodic table. In the modern IUPAC nomenclature, Group 4 of the periodic table contains titanium (Ti), zirconium (Zr), hafnium (Hf) and rutherfordium (Rf). This group lies in the d-block of the periodic table. The group itself has not acquired a trivial name; it belongs to the broader grouping of the transition metals. The three Group 4 elements that occur naturally are titanium(Ti), zirconium (Zr) and hafnium (Hf) and the radioactive rutherfordium (Rf). All isotopes of rutherfordium are radioactive, and have been synthesized in the laboratory, none of them have been found occurring in nature. So far, no experiments in a supercollider were conducted to synthesized the next member of the group Unpentquadium (Upq). As Upq is a late member of period 8 element it is unlikely that this element will be synthesized in the near future.

The first three members of the group share similar properties all three are under standard conditions hard refractory metals.

Contents 1 Characteristics 1.1 Chemistry 2 History 3 Production 4 Occurrence 5 Applications 6 Biological occurrences 7 Precaution 8 References

[edit] Characteristics

[edit] Chemistry

Like other groups, the members of this family show patterns in its electron configuration, especially the outermost shells resulting in trends in chemical behavior:

Z	Element	No. of electrons/shell
22	titanium	2, 8, 10, 2
40	zirconium	2, 8, 18, 10, 2
72	hafnium	2, 8, 18, 32, 10, 2
104	rutherfordium	2, 8, 18, 32, 32, 10, 2

Most of the chemistry has been observed only for the first three members of the group, the chemistry of rutherfordium is not very established and therefore the rest of the section deals only with titanium, zirconium, and hafnium. All the elements of the group are reactive metals with a high melting point (1668 °C, 1855 °C, 2233 °C). The reactivity is not always obvious due to the rapid formation of a stable oxide layer, which prevents further reactions. The oxides TiO₂, ZrO₂ and HfO₂ are white solid with high melting points and unreactive against most acids.

As tetravalent transition metals, all four elements forms various inorganic compounds, generally in the oxidation state of +4. For the first three metals, it has been shown that they are resistant to concentrated alkalis, but halogens react with them to form tetrahalides. At higher temperatures, all three metals react with oxygen, nitrogen, carbon, boron, sulfur, and silicon. Due to the lanthanide contraction of the elements in the fifth period, zirconium and hafnium have nearly identical ionic radii. The ionic radius of Zr⁴⁺ is 79 picometres and that of Hf⁴⁺ is 78 pm.^[1]

This similarity results in nearly identical chemical behavior and in the formation of similar chemical compounds.^[1] The chemistry of hafnium is so similar to that of zirconium that a separation on chemical reactions was not possible, only the physical properties of the compounds differ. The melting points and boiling points of the compounds and the solubility in solvents are the major differences in the chemistry of these twin elements.^[2]

[edit] History

While titanium and zirconium as relative abundant elements where discovered in the late 17th century, it took until 1923 for the discovery of hafnium. This was only partly caused by the lower abundance. The chemical similarity between zirconium and hafnium made a separation difficult and without knowing what to look for hafnium was left undiscovered, although all samples of zirconium and all its compounds used by chemists for over two centuries contained significant amounts of hafnium.^[3]

William Gregor, Franz Joseph Muller and Martin Heinrich Klaproth discovered indepently titanium between 1791 and 1795. Klaproth named it for the Titans of Greek mythology.^[4] Klaproth discovered also zirconium in the mineral zircon in 1789 and named it after the alrteady known Zirkonerde (zirconia).

Hafnium had been predicted by Dmitri Mendeleev in 1869 and Henry Moseley measured in 1914 the effective nuclear charge by X-ray spectroscopy to be 72, putting it between the already known elements lanthanum and tantalum. Dirk Coster and Georg von Hevesy were the first to search for the new element in zirconium ores.^[5] Hafnium was discovered by the two in 1923 in Copenhagen, Denmark, validating the original 1869 prediction of Mendeleev.^[6]

Element 104 was reportedly first detected in 1966 at the Joint Institute of Nuclear Research at Dubna (then in U.S.S.R.). Researchers there bombarded ²⁴²Pu with accelerated ²²Ne ions and separated the reaction products by gradient thermochromatography after conversion to chlorides by interaction with ZrCl₄.^[7]

24294Pu + 2210Ne → 264-x104Rf → 264-x104RfCl₄

[edit] Production

The production of the metals itself is difficult due to their reactivity. The formation of oxides, nitrides and carbides must be avoided to yield workable metals, this is normally achieved by the Kroll process. The oxides (MO₂) are reacted with coal and chlorine to form the chlorides (MCl₄).The chlorides of the metals are than reacted with magnesium yielding magnesium chloride and the metals.

Further purification is done by a chemical transport reaction developed by Anton Eduard van Arkel and Jan Hendrik de Boer. In a closed vessel, the metal reacts with iodine at temperatures of above 500 °C forming metal(IV) iodide; at a tungsten filament of nearly 2000 °C the reverse reaction happens and the iodine and metal are set free. The metal forms a solid coating at the tungsten filament and the iodine can react with additional metal resulting in a steady turn over.^[2][8]

M + 2I₂ (low temp.) → MI₄

MI₄ (high temp.) → M + 2I₂

[edit] Occurrence

If the abundance of elements in Earth's crust is compared of titanium, zirconium and hafnium the abundance decreases with increase of atomic mass. Titanium is the seventh most abundant metal in Earth's crust and has an abundance of 6320 ppm, while zirconium has an abundance of 162 ppm and hafnium has only an abundance of 3 ppm.^[9]

All three stable elements occur in heavy mineral sands ore deposits, which are placer deposits formed most usually in beach environments by concentration due to the specific gravity of the mineral grains of erosion material from mafic and ultramafic rock. The titanium minerals are mostly anatase and rutile and zirconium occurs in the mineral zircon in which due to the chemical similarity up to 5% of the zirconium is replaced by hafnium. The largest producers of the group 4 elements are Australia, South Africa and Canada.^{[10][11][12][13][14]}

[edit] Applications

While titanium metal and it's alloys have a wide range of applications, where the corrosion resistance, the heat stability and the low density (light weight) are of benefit. The corrosion resistant hafnium and zirconium have been foremost used in nuclear reactors. Due to the fact that zirconium has a very low and hafnium has a high thermal neutron-capture cross-section, zirconium mostly as zircaloy is used as cladding of fuel rods in nuclear reactors,^[15] while hafnium is used as control rod for nuclear reactors, because each hafnium atom can absorb multiple neutrons.^[16][17]

Smaller amounts of hafnium^[18] and zirconium are used in supper alloys to improve the properties of those alloys.^[19]

[edit] Biological occurrences

The group 4 elements are not known to be involved in the biological chemistry of any living systems.^[20] They are hard refractory metals with low aqueous solubility and low availability to the biosphere. Titanium is one of the few first row d-block transition metals with no known biological role. Rutherfordium's radioactivity would make it toxic to living cells.

[edit] Precaution

Titanium is non-toxic even in large doses and does not play any natural role inside the human body.^[20] Zirconium powder can cause irritation, but only contact with the eyes requires medical attention.^[21] OSHA recommends for zirconium are 5 mg/m³ time weighted average limit and a 10 mg/m³ short-term exposure limit.^[22] While only limited data exists on the toxicology of hafnium.^[23]

[edit] References

v • d • e Periodic tables Layouts Standard · Inline f-block · Vertical · Full names · Names and atomic weights · Text for last · Large table · Metals and nonmetals · Blocks · Valences · Extension beyond the 7th period · Electron configurations · Atomic weights · Electronegativities · Alternatives · Crystal structure Lists of elements by Name · Atomic symbol · Atomic number · Atomic weight · Name etymology (after places, after people) · Discovery Boiling point · Melting point · Density · Oxidation state · Abundance (in humans) · Nuclear stability · Hardness Groups 1 (Alkali metals) · 2 (Alkaline earth metals) · 3 · 4 · 5 · 6 · 7 · 8 · 9 · 10 · 11 · 12 · 13 (Boron group) · 14 (Carbon group) · 15 (Pnictogens) · 16 (Chalcogens) · 17 (Halogens) · 18 (Noble gases) Periods 1 · 2 · 3 · 4 · 5 · 6 · 7 · 8 Other element categories Metals · Transition metals (1st row) · Metalloids · Nonmetals · Lanthanoids · Actinoids · Rare earth elements · Platinum group metals (PGMs) · Post-transition metals Blocks s-block · p-block · d-block · f-block