This article does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (October 2009)

A flue is a duct, pipe, or chimney for conveying exhaust gases from a fireplace, furnace, water heater, boiler, or generator to the outdoors. In the U.S.A., for water heaters and modern furnaces they are also known as 'vents' and for boilers as 'breeching'. They usually operate by buoyancy, also known as the stack effect, or the combustion products may be 'induced' via a blower. As combustion products contain carbon monoxide and other dangerous compounds, proper 'draft', and admission of replacement air is imperative. Building codes, and other standards, regulate their materials, design, and installation.

Contents 1 Heat retention 2 Other uses 2.1 Organs 2.2 Boilers 3 Flue-types 4 See also 5 External links

[edit] Heat retention

Flues are designed to release noxious gases to the atmosphere, but they often have the disadvantage of releasing useful heat to the atmosphere. In some countries, wood fire flues are often built into a heat preserving construction within which the flue gases circulate over heat retaining bricks before release to the atmosphere. The heat retaining bricks are covered in a decorative material such as brick, tiles or stone. This flue gas circulation avoids the considerable heat loss to the chimney and outside air in conventional systems. The heat from the flue gases is absorbed quickly by the bricks and then released slowly to the house rather than the chimney. In a well insulated home, a single load fire burning for one and a half hours twice a day is enough to keep an entire home warm for a 24 hour period. In this way, less fuel is used, and noxious emissions are reduced. Sometimes, the flue incorporates a second combustion chamber where combustibles in the flue gas are burnt a second time, reducing soot, noxious emissions and increasing overall efficiency.

[edit] Other uses

[edit] Organs

The term flue is also used to define certain pipe organ pipes, or rather, their construction or style. Roman Thermaes constructed centuries ago had flues.

[edit] Boilers

Another use of the term is for the internal flues of a flued boiler.

[edit] Flue-types

Flue-types include

• Balanced flue
• Power flue
• Die flue

[edit] See also

• Flue gas stack
• Combustion
• Masonry heater

[edit] External links

• How to identify your flue