add site
services
publishers
database
health videos
toolbar
stats
live show
health store
more stuff
JOIN/LOGIN
| advertise add site services publishers database health videos
| | about toolbar stats live show health store more stuff JOIN/LOGIN |
Men's Shirts - Dress Shirts, Polo Shirts, Jerzees nursinghomeapparel.com | Pilates Long Sleeve T-Shirt, Pilates Shirt, Pilates T-Shirt basipilates.com |
 A dress shirt (in American English), or simply shirt (also button-front or button-up shirt) is a shirt with a collar, a full-length opening at the front from the collar to the hem, and sleeves with cuffs. Dress shirts are predominantly used by men, since women usually wear blouses. The front opening is fastened using buttons or studs, and the cuffs close with buttons or cuff links. Dress shirts are normally made from woven cloth, and are often accompanied by a jacket and tie, for example with a suit or formalwear, but the shirts are also worn more casually without. While the term button-down is sometimes used in American English to refer to shirts in general, it is still generally used, as originally, to refer to a shirt with a buttoned collar. In British English, a dress shirt is known as just a shirt, while dress shirt means specifically the more formal evening garment worn with black- or white- tie, also discussed below. Some of these formal shirts have stiff fronts and detachable collars attached with collar studs.
[edit] ComponentsA shirt has several components: one-piece back, usually pleated or gathered; one-piece sleeves with plackets at the wrist, or else short-sleeved (cut off above the elbow), though this is untraditional; a band of fabric around each wrist known as a cuff; the collar, a strip around the neck, which is normally a turndown collar, with the strip folded down away from the neck, leaving two points at the front, the width of which is known as the spread; a section of fabric behind the neck and over the shoulders known as the yoke, either one-piece or split in half vertically in the middle; and finally two front panels which overlap slightly down the middle on the placket to fasten with buttons (or rarely studs). [edit] Collars Main article: Collar There are various different styles of collar, which is the primary indicator of the formality of a shirt.[1] Those discussed here are all attached collars, not styles specific to detachable collars.
The less-common styles below were all once common, but have waned in popularity.
Contrast collar shirts are occasionally made, which are white collars on a coloured or patterned shirt. These are worn for a variety of reasons, such as to offset certain complexions;[2] because of a tradition started by detachable collars, where it is impractical to have many collars in different matching colours; and finally because when a collar is replaced it is unlikely an exact colour match will be found.[3] These collars are generally considered more formal than matching fabric. [edit] CuffsMain article: Cuff The main distinctions between cuffs are whether they require buttons or cufflinks to fasten, and whether they are folded back (double) or single. The main resulting types are therefore
In addition, there are some variations, for example barrel cuffs may be mitred, with the corner cut off at 45°. Less common styles include the Portofino, or cocktail cuff, which is a double cuff closed with buttons, first made by the Jermyn Street shirtmakers Turnbull & Asser, and later popularised by the fictional character James Bond in the films from 1962 onwards. [edit] Other featuresA high quality traditional shirt has long tails, extending almost to the knees at the back, and so has seven or eight buttons. The vertical strip of fabric running down the front opening is called the placket, and gives a more symmetrical appearance to the join between the left side, on top, and the right. This left over right order is also seen in waistcoat and coat fastenings, though women's clothing buttons the other way (right over left). The buttonholes, aligned vertically, are placed on the placket, though the top button and buttons at the bottom of stiff fronts are aligned horizontally. The buttonholes are one of the few places where the difference between hand and machine stitching can be observed while the shirt is being worn, and fashion designers sometimes use contrasting thread here or on the buttons themselves for extra impact. To give extra fullness to the back, there are often pleats where the back panel joins to the yoke. On some fittings these are not needed, and handmade shirts may feature the extra fabric being worked continuously into the seam. In America, a box pleat is common (two pleats together in the centre), while in Britain the pleats are placed wider out under the shoulders. The less casual shirts in England will have no pockets, but the standard shirt in America has a single one on the wearer's left side, which is a sewn-on patch with a plain upper hem, optionally with a single button for closure. This small pocket is large enough to hold a pack of cigarettes or a few pens (a pocket protector can be used).[4] Less formal shirts may feature larger pockets, dual pockets, or pockets with flap closures; safari or other military styled shirts often feature two large pockets with buttoned flaps. Short-sleeved shirts have a plain (no-button) hem above the wearer's elbow. They are considered a casual summer or tropical option, though many people wear only the traditional long sleeves in all circumstances.[5] [edit] Formal shirtsIn the UK, the term dress shirt is reserved for a particular type of formal shirt. There are formal day shirts for wearing with morning dress, and the white dress shirts used as eveningwear. A day dress shirt is fairly similar to a normal shirt, and is usually white, with a stiff detachable collar, though other designs, such as a fine horizontal blue stripe, are also appropriate. Double cuffs are most common. This sort of shirt is also required to be worn by some barristers and judges. An evening shirt, for wear with eveningwear, for example as part of black or white tie has some unique features. In the U.S., this shirt is often called a tuxedo shirt or tux. shirt. The shirt is always white. The shirt required for white tie is very specific. It should have a detachable wing collar and be fastened with shirt studs instead of buttons on the front. The studs are normally mother of pearl set in gold or silver, but black onyx inlay is also permissible. The cufflinks should match the studs. The shirt front has panels made of different material from the rest of the shirt which are the only parts seen under the waistcoat. The shape of the panels, one on each side, is either rectangular, or the older U-shape (designed to sit under the older 1920s U-shaped waistcoats, now largely replaced by the more modern V-shape). The material for the panels is either layers of thick plain cotton, or marcella (piqué) cotton. Marcella is more common, but a little less formal, though still appropriate, since it was originally designed to be used on formal evening shirts, as the ribbing can pick up more starch and create an even stiffer front. Traditionally, collarless shirts with a detachable wing collar fastened on with collar studs have been used, but all-in-one designs are occasionally seen, though this is considered incorrect and to give a poor appearance by many.[6][7] Cuffs are single, and heavily starched (if the front is marcella, the cuffs usually match). Black tie offers more leeway. Shirts may be soft (not starched), which gives the options of unstarched marcella or a pleated front, as well as the white tie shirts, which may also be worn with black tie. The collar is still sometimes a stiff high wing collar (common in America, though the attached variety is more popular there), or a turndown collar (more frequently seen in Britain). In past decades, particularly the 1970s, ruffled shirt fronts were made fashionable by Will Hunter,[citation needed] although they are now out of favour. Dress-studs are optional, and are onyx set in either silver or gold if used; otherwise the buttons are normally concealed under a placket. Cufflinks tend to be as simple and understated as possible, and harmonise with, if not match, the studs. [edit] Other categoriesDress shirt evolves through its time, and it varieties in styles, materials and functions and so on.
There are other segments such as embroidered, striped and checkered dress shirts.[9] [edit] MaterialsShirts are made of woven cloth. The yarns most frequently used in the past were cotton and linen, but polyester or polyester blends are now used the most due to their low cost, despite being considered by most tailors the poorest material, owing to less softness and breathability.[10] However, while high quality cotton shirts can survive with care a few decades, a polyester/cotton blend may be used in more demanding environments. Linen produces a cool fabric that wrinkles heavily, and is mostly used in light summer shirts. Cotton is therefore the standard material for all but the cheapest shirts. Silk is occasionally worn, though it is hot to wear and has a marked sheen. These yarns are woven into a variety of different weaves, the most notable of which include broadcloth, with double the number of warp to weft threads, giving a smooth, formal shirting; twill, where the tucks of the weft do not line up, giving a diagonal pattern, a weave used for most country checked (e.g. Tattersall) shirtings; poplin, with a heavier warp than weft, giving more formal fabric; and Oxford weaves. Plain Oxford or pinpoint Oxford weaves are popular as casual fabrics, so are generally used in combination with a button-down collar, while royal Oxford is versatile enough to be used on both sporty and formal shirts. There are many other weaves or variations on these, including end-on-end patterns, where alternate white and coloured threads are used, giving a mottled appearance, or more exotic weaves, including voile and batiste, which are extremely light fabrics only used for summer shirts or on the unseen parts of formal shirts.[11] The use of pattern and colour is also significant. Originally, in the Edwardian era, when the modern shirt emerged, all shirts were white. Gradually more colours were introduced, including blue, now the most popular colour, particularly in lighter shades such as Wedgwood. The intended use of shirts dictates different choices of pattern. For example, country shirts are usually checked, with checks of different size to co-ordinate with tweeds of different pattern, and featuring one, two, or sometimes more colours of check over a light cream or white background. For city shirts, plain or striped designs are more common, most stripes being vertical, while horizontal stripes are a legitimate and more formal option. Some colours, such as purple or pink, are generally only worn with city shirts. Further, the use of colour is seasonal, with shades like green being associated more with autumn than summer ones like yellow. Colours and patterns may be chosen for more than simply aesthetic reasons, as trends such as power dressing (first noted in Molloy, Dress for Success [1975]) emphasise the social impact of clothing. For example, a City executive might stereotypically wear strong vertical patterns for meetings to emphasise his authority. [edit] Shirt wearing A dress shirt is ironed to remove any wrinkles and can be treated with starch for added smoothness and stiffness. The hem is tucked into the trouser. For informal- or formalwear, a coat and tie (or bow tie) are compulsory. When a tie is worn, the top button of the shirt is fastened, so the tie can fit snugly around the wearer’s neck with a neat appearance. In casual usage, this is often not followed, with many choosing to wear shirts not tucked in, or leaving the top button undone with a tie. This is commonly done by children and young men, particularly as part of school uniform, where it is not allowed. Even more casually, some now choose not to iron their shirts, or use untraditional 'non-iron' fabrics. [edit] FitIn the US, ready-to-wear sizes of dress shirts traditionally consist of two numbers such as 15½ 34, meaning that the shirt has a neck 15.5 inches in girth (measured from centre of top button to centre of corresponding buttonhole) and a sleeve 34 inches long (measured from midpoint of the back and shoulders to the wrist). However, to reduce the number of sizes needed to be manufactured and stocked, an average sleeve length is sometimes given in the form 15½ 34/35 (indicating a neck 15.5 inches in girth and a 35 inch sleeve). Since the cuff frequently features two buttons, the cuff diameter can be reduced so that the cuff does not come down over the hand, allowing the shirt to fit the shorter length. Since the sleeve and neck size do not take into account waist size, most shirts are cut wide to accommodate rather large belly sizes. Shirts cut for flat stomachs are usually labeled, "fitted", "athletic fit" or "trim fit". The terms for fuller cut shirts are more varied, sometimes explained on a shirt maker's website. Very casual button-front shirts are often sized as small, medium, large, and so on. The meaning of these ad-hoc sizes is similarly not standardized and varies between manufacturers. In the bespoke (custom-made) industry, where each shirt is made from an individually drafted pattern, these sizing problems are avoided, but there are still different ways making the shirt fit. While many choose to cut the sleeve long, and have the cuff catch on the hand to regulate its length, some prefer the much harder option of using a high armhole and carefully tailored shape, so that the cuff can be loose and still sit in exactly the right place wherever the arm moves.[12] Made-to-measure shirts may not fit quite as well as bespoke, but can provide a similar degree of customisation and fit at a lower cost. [edit] Notable shirtmakersAccording to Forbes,[13] some of the world's best[14] men's shirtmakers include Giorgio Armani, Luigi Borrelli, Budd, Davide Cenci, Charvet, Harvie & Hudson, Hermès, Hilditch & Key, Ralph Lauren Purple Label, New & Lingwood, J. Press, Thomas Pink, Turnbull & Asser, and Ermenegildo Zegna. Many of these are known for a traditional style, particularly old Jermyn Street shops, or some noted American firms like Brooks Brothers, while fashion designers, including Armani and new Jermyn Street shops like Thomas Pink, have a more contemporary approach. For sixty years, US designers and manufacturers of neckties and dress shirts were members of the Men's Dress Furnishings Association but the trade group shut down in 2008 due to declining membership due to the declining numbers of men wearing neckties.[15] [edit] BibliographyThese general works cover most of the material in the article, and are not referenced by page on all points.
[edit] References
|
| ↑ top of page ↑ | about thumbshots |
