In physics, the term dielectric strength has the following meanings:

• Of an insulating material, the maximum electric field strength that it can withstand intrinsically without breaking down, i.e., without experiencing failure of its insulating properties.
• For a given configuration of dielectric material and electrodes, the minimum electric field that produces breakdown.
• the maximum electric stress the dielectric material can withstand without breakdown

The theoretical dielectric strength of a material is an intrinsic property of the bulk material and is dependent on the configuration of the material or the electrodes with which the field is applied. At breakdown, the electric field frees bound electrons. If the applied electric field is sufficiently high, free electrons may become accelerated to velocities that can liberate additional electrons during collisions with neutral atoms or molecules in a process called avalanche breakdown. Breakdown occurs quite abruptly (typically in nanoseconds)., resulting in the formation of an electrically conductive path and a disruptive discharge through the material. For solid materials, a breakdown event severely degrades, or even destroys, its insulating capability.

Factors affecting dielectric strength

• it increases with the increase in thickness of the specimen. (Directly proportional)
• it decreases with the increase in operating temperature. (Inversely proportional)
• it decreases with the increase in frequency. (Inversely proportional)
• it decreases with the increase in humidity. (Inversely proportional)

Contents 1 Breakdown field strength 2 See also 3 References 4 External links

[edit] Breakdown field strength

The field strength at which breakdown occurs in a given case is dependent on the respective geometries of the dielectric (insulator) and the electrodes with which the electric field is applied, as well as the rate of increase at which the electric field is applied. Because dielectric materials usually contain minute defects, the practical dielectric strength will be a fraction of the intrinsic dielectric strength seen for ideal, defect free, material. Dielectric films tend to exhibit greater dielectric strength than thicker samples of the same material. For instance, dielectric strength of silicon dioxide films of a few hundred nm to a few μm thick is approximately 0.1 MV/m. However very thin layers become partially conductive because of electron tunneling. Multiple layers of thin dielectric films are used where maximum practical dielectric strength is required, such as high voltage capacitors and pulse transformers.

Dielectric strength (in MV/m) of various common materials for thick layers:

Substance	Dielectric Strength (MV/m)
Helium[1]	0.15
Air[2]	0.4 - 3.0 (depends on pressure) [3]
Alumina[1]	13.4
Window glass[1]	9.8 - 13.8
Silicone oil,Mineral oil[1] [4]	10 - 15
Polystyrene[1]	19.7
Neoprene rubber[1]	15.7 - 27.6
Ultra pure Water[5]	30
Mica [6]	20-70
Waxed paper [7]	40-60
Benzene[1]	16 Please check
Teflon[8]	10 - 60 depends on type
Polyethylene [9]	18.9-21.7
Fused silica [10]	47 - 67
High Vacuum (field emission limited) [11]	20-40 (depends on electrode shape)
Thin films of SiO2 in ICs [1]	100

[edit] See also

• Dielectric constant
• Rotational Brownian motion

[edit] References

1. ^ ^{a b c d e f g} CRC Handbook of Chemistry and Physics
2. ^ http://hypertextbook.com/facts/2000/AliceHong.shtml
3. ^ http://blazelabs.com/l-vacuum.asp
4. ^ http://www.tf.uni-kiel.de/matwis/amat/elmat_en/kap_3/backbone/r3_5_1.html
5. ^ http://www.waterfuelconverters.com/SandiaNationalLabsData.html
6. ^ http://www.tf.uni-kiel.de/matwis/amat/elmat_en/kap_3/backbone/r3_5_1.html
7. ^ http://hypertextbook.com/facts/2007/DashaMulyukova.shtml
8. ^ http://physics.info/dielectrics/
9. ^ http://hypertextbook.com/facts/2009/CherryXu.shtml
10. ^ http://www.sciner.com/Opticsland/FS.htm
11. ^ http://www.htee.tu-bs.de/forschung/veroeffentlichungen/giere2002.pdf

•  This article incorporates public domain material from the General Services Administration document "Federal Standard 1037C" (in support of MIL-STD-188).

[edit] External links

• Dielectric Strength and Insulation Materials of Mineral Insulated Cable
• Article "The maximum dielectric strength of thin silicon oxide films" from IEEE Transactions on Electron Devices
• Properties of silicon dioxide and silicon nitride, from semiconductorglossary.com