The drum kit

1 Crash cymbal | 2 Floor tom | 3 Toms 4 Bass drum | 5 Snare drum | 6 Hi-hat

Other components

Ride cymbal | China cymbal | Splash cymbal | Sizzle cymbal Swish cymbal | Cowbell | Wood block | Tambourine Rototom | Octoban | Hardware

A crash cymbal is a type of cymbal that produces a loud, sharp "crash" and is used mainly for occasional accents, as opposed to in ostinato. The term "crash" may have been first used by Zildjian in 1928. They can be mounted on a stand and played with a drum stick, or by hand in pairs. One or two crash cymbals are a standard part of a drum kit. Suspended crash cymbals are also used in bands and orchestras, either played with a drumstick or rolled with a pair of mallets to produce a slower, swelling crash. Sometimes a drummer may hit two different crash cymbals in a kit at the same time to produce a very loud accent, usually in rock music.

Although crash cymbals range in thickness from paper-thin to very heavy, all crash cymbals have a fairly thin edge. They are typically 14 to 18 inches in diameter, but sizes down to 8 inches and up to 24 inches are manufactured. Custom crash cymbals up to 28 inches in diameter have been used by big bands. Different thicknesses are used for different kinds of music, and the alloy for each manufacturer's models varies. A thick cymbal is likely to be used by a metal or rock band, while thinner cymbals are generally used in lighter rock.

A 16 inch Zildjian A custom Projection Crash

The sound of a crash is changed by its luster. A cleaner cymbal creates a more crisp sound, whereas a cymbal showing signs of oxidation [usually called a 'raw' cymbal, when used on purpose] will have duller sound.

[edit] Position

Crash cymbals were traditionally placed on the left side of the drum set (for a right-handed drummer), since the larger, more commonly used ride cymbal is usually on the right. Most drummers today use more than 1 crash cymbal.

[edit] Cracking

Crashes are sometimes the first cymbal in a setup to crack and warp due to repeated striking of the bell and edge. Some suggest that wear on the cymbal can be reduced by playing with glancing blows (angled to the side, slightly away from the vertical) about a quarter of the way between the edge and the center and allowing the drum stick to bounce off naturally, rather than forcing the stick down at the cymbal head-on. When a cymbal does crack, some suggest that it may be stopped by drilling a hole at the end of the crack or cutting it out completely. This often slows down the crack, but doesn't completely stop it.^{[citation needed]}

[edit] Orchestra Crash cymbals

A pair of identical crash cymbals held in either hand by leather thongs(shoes) passing through holes in their bells are called crash cymbals, and are a standard part of an orchestral percussion section. Two tones are normally used by major orchestras, known as Germanic or Wagnerian (heavier) and Viennese (lighter); a third, rarer tone is known as French (lighter still). Crash cymbals are also used in stage, concert, marching and military bands.

Audio samples
Component	Content	Audio (Ogg Vorbis)
Crash	Crash cymbal	52 KB (help·info)
See the Drums page at Wikipedia Commons for more