Part of the Biology series on
Evolution
Mechanisms and processes
Adaptation Genetic drift Gene flow Mutation Natural selection Speciation
Research and history
Introduction Evidence Evolutionary history of life History Modern synthesis Social effect Theory and fact Objections / Controversy
Evolutionary biology fields
Cladistics Ecological genetics Evolutionary development Human evolution Molecular evolution Phylogenetics Population genetics
Biology portal · v • d • e

Cladistics (ancient Greek: κλάδος, klados, "branch") is a form of biological systematics that classifies organisms into hierarchical monophyletic groups. It can be distinguished from other taxonomic systems, such as phenetics, by its focus on shared derived characters (synapomorphies). Previous systems usually employed overall morphological similarity to group species into genera, families and other higher level classification; cladistic classifications (usually trees called cladograms) are intended to reflect the relative recency of common ancestry or the sharing of homologous features. Cladistics is also distinguished by its emphasis on objective, quantitative analysis, rather than subjective decisions that some other taxonomic systems rely upon^[1].

Cladistics originated in the work of the German entomologist Willi Hennig, who himself referred to it as "phylogenetic systematics"; the use of the terms "cladistics" and "clade" was popularized by other researchers^[2]. Cladistics originated in the field of biological systematics, but has been successfully applied in other disciplines: for example, to determine the relationships between the surviving manuscripts of the Canterbury Tales^[3].

Cladists use cladograms, diagrams which show ancestral relations between organisms, to represent the evolutionary tree of life. Although traditionally such cladograms were generated largely on the basis of morphological characters, DNA and RNA sequencing data and computational phylogenetics are now very commonly used in the generation of cladograms.

[edit] Clades

The yellow group (sauropsids) is monophyletic, the blue group (reptiles) is paraphyletic, and the red group (warm-blooded animals) is polyphyletic.

The clade is a central element in cladistics. A clade is a group, consisting of a single organism and all of its descendants. In the diagram provided, it is hypothesized that the first vertebrate is the common ancestor of all vertebrates, including fishes (Pisces). The first tetrapod is also the ancestor of all tetrapods, including amphibians, reptiles, mammals and birds. The tetrapod ancestor was a descendant of the original vertebrate ancestor, but is not an ancestor of any fish. We can also think of a vertebrate clade, encompassing all vertebrates, which consists of a fish clade (emcompassing all fish) and a tetrapod clade (consisting of all the tetrapods) and so on.

An important idea here is that this cladogram is an evolutionary hypothesis. It is falsifiable: further genetic or morphological evidence might suggest that fish and amphibians shared a common ancestor which was not an ancestor of the other tetrapods, for instance, which would cause us to define a fish-and-amphibian clade which, along with the tetrapod clade, is descended from the vertebrate ancestor (thus putting both clades into the vertebrate clade).

[edit] Used terms

The following terms are used to identify shared or distinct characters amongst groups:

• An ancestral state or plesiomorphy (meaning "close form") is a characteristic that is present at the base of the tree. In this tree, the presence of a backbone (shared by all vertebrates) can be hypothesized to have existed in the common vertebrate ancestor.
• A derived state or apomorphy (meaning "separate form") is a characteristic which is believed to have evolved within the tree. All tetrapods have four limbs; thus, having four limbs is an apomorphy for vertebrates but a plesiomorphy for tetrapods.
• An apomorphy which is shared between two taxa is considered a synapomorphy.
• The use of the terms apomorphy, synapomorphy, and plesiomorphy (or symplesiomorphy) depends on ones perspective in the tree and are thus relative terms. An apomorphy of one group is its plesiomorphy when discussing the interrelationships of species that are contained within that group. Thus, the terms can be thought of as equivalent in their expression of the homology relation^[4][5][6], but allow one to express the hierarchical relationships among different homologies.

Three main types of groups can be identified by plotting their relationships in cladograms:

• Monophyletic groups are groups consisting only of organisms descended from a particular organism. In this diagram, all vertebrates are monophyletic, since all the organisms are descended from a single ancestor (the common vertebrate ancestor). The relation which defines a monophyletic group is synapomorphy.^[4][5][6]
• A paraphyletic group is a grouping which excludes a monophyletic subgroup, and thus consists of some but not all the descendants of a single ancestor. For instance, excluding birds from this cladogram would create a paraphyletic group. Paraphyletic groups are thus typically diagnosed on the basis of shared plesiomorphy and the exclusion of one or more groups that are diagnosable by a synapomorphy (i.e. 'fish' lack digits, and thus exhibit a plesiomorphic state that excludes tetrapods from membership).^[4][5][6]
• A polyphyletic group consists of organisms from two or more different monophyletic groups. For instance, a grouping of birds and mammals to the exclusion of lizards and crocodiles is not monophyletic. Lizards and crocodiles are more closely related to birds (as diapsids) than are mammals. Instead, these four groups form a monophyletic grouping at the level of Amniota. Polyphyletic groups are defined by the homoplasy relation.^[4][5][6]

Clades or species relate to each others in different ways:

• A clade is basal to another clade if it contains that other clade as a subset within it. In this case, the vertebrate clade is basal to the tetrapod and fish clades. A common terminological abuse of "basal" is applied when referring to a taxon that is less species-rich than a nearby sister taxon, and is often taken to (perhaps mistakenly) imply primitiveness.^[7]
• A clade or species located within a clade is said to be nested within that clade. The bird clade is nested within the reptilian clade.

[edit] Three definitions of clade

The three ways to define a clade.

There are three major ways to define a clade for use in a cladistic taxonomy.^[8]

• Node-based: the last common ancestor of A and B, and all descendants of that ancestor. Crown groups are a type of node-based clade.

• Branch-based: the first ancestor of A which is not also an ancestor of C, and all descendants of that ancestor. (This type of definition was originally called "stem-based", but this was changed to avoid confusion with the term "stem group".) Total groups are a type of branch-based clade.

• Apomorphy-based: the first ancestor of A to possess derived trait M homologously (that is, synapomorphically) with that trait in A, and all descendants of that ancestor. The process of identifying and naming groups based on apomorphies is the method that most resemble classical systematics, with the exception that cladistic taxa always denote a clade.

[edit] History of cladistics

Hennig's major book, even the 1979 version, does not contain the term cladistics in the index. He referred to his own approach as phylogenetic systematics, as implied by the book's title. A review paper by Dupuis observes that the term clade was introduced in 1958 by Julian Huxley, cladistic by Cain and Harrison in 1960, and cladist (for an adherent of Hennig's school) by Mayr in 1965.^[9]

From the time of Hennig's original formulation until the end of the 1980s cladistics remained a minority approach to classification. However in the 1990s it rapidly became the dominant method of classification in evolutionary biology. Cheap but increasingly powerful personal computers made it possible to process large quantities of data about organisms and their characteristics. At about the same time the development of effective polymerase chain reaction techniques made it possible to apply cladistic methods of analysis to biochemical and molecular genetic features of organisms as well as to anatomical ones.^[10]

[edit] Cladistics as a successor to phenetics

For some decades in the mid to late twentieth century, a commonly used methodology was phenetics ("numerical taxonomy"). This can be seen as a predecessor^[11] to some methods of today's cladistics (namely distance matrix methods like neighbor-joining), but made no attempt to resolve phylogeny, only similarities.

[edit] Cladograms

It has been suggested that this section be split into a new article titled Cladogram. (Discuss)

The starting point of cladistic analysis is a group of species and molecular, morphological, or other data characterizing those species. The end result is a tree-like relationship diagram called a cladogram,^[12] or sometimes a dendrogram (Greek for "tree drawing").^[13] The cladogram graphically represents a hypothetical evolutionary process. Cladograms are subject to revision as additional data become available.

[edit] Synonyms

The terms evolutionary tree, and sometimes phylogenetic tree are often used synonymously with cladogram,^[14] but others treat phylogenetic tree as a broader term that includes trees generated with a nonevolutionary emphasis.

[edit] Subtrees are clades

In cladograms, all organisms lie at the leaves.^[15] The two taxa on either side of a split, with a common ancestor and no additional descendents, are called sister taxa or sister groups.^[16] Each subtree, whether it contains only two or a hundred thousand items, is called a clade.

[edit] 2-way versus 3-way forks

Many cladists require that all forks in a cladogram be 2-way forks. Some cladograms include 3-way or 4-way forks when there are insufficient data to resolve the forking to a higher level of detail. See phylogenetic tree for more information about forking choices in trees.

[edit] Number of distinct cladograms

For a given set of species, the number of distinct cladograms that can be drawn (ignoring which cladogram best matches the species characteristics) is:^[17]

This superexponential growth of the number of possible cladograms explains why manual creation of cladograms becomes very difficult when the number of species is large.

[edit] Depth

If a cladogram represents N species, the number of levels (the "depth") in the cladogram is on the order of log₂(N).^[18] For example, if there are 32 species of deer, a cladogram representing deer could be around 5 levels deep (because 2⁵ = 32), although this is really just the lower limit. A cladogram representing the complete tree of life, with about 10 million species, could be about 23 levels deep. This formula gives a lower limit, with the actual depth generally a larger value, because the various branches of the cladogram will not be uniformly deep. Conversely, the depth may be shallower if forks larger than 2-way forks are permitted.

[edit] Time scale

A cladogram tree has an implicit time axis,^[19] with time running forward from the base of the tree to the leaves of the tree. If the approximate date (for example, expressed as millions of years ago) of all the evolutionary forks were known, those dates could be captured in the cladogram. Thus, the time axis of the cladogram could be assigned a time scale (e.g. 1 cm = 1 million years), and the forks of the tree could be graphically located along the time axis. Such cladograms are called scaled cladograms. Many cladograms are not scaled along the time axis, for a variety of reasons:

• Many cladograms are built from species characteristics that cannot be readily dated (e.g. morphological data in the absence of fossils or other dating information)
• When the characteristic data are DNA/RNA sequences, it is feasible to use sequence differences to establish the relative ages of the forks, but converting those ages into actual years requires a significant approximation of the rate of change^[20]
• Even when the dating information is available, positioning the cladogram's forks along the time axis in proportion to their dates may cause the cladogram to become difficult to understand or hard to fit within a human-readable format

[edit] Extinct species

Cladistics makes no distinction between extinct and extant species,^[21] and it is appropriate to include extinct species in the group of organisms being analyzed. Cladograms that are based on DNA/RNA generally do not include extinct species because DNA/RNA samples from extinct species are rare. Cladograms based on morphology, especially morphological characteristics that are preserved in fossils, are more likely to include extinct species.

[edit] Cladistics in taxonomy

It has been suggested that this section be split into a new article titled Phylogenetic nomenclature. (Discuss)

[edit] Cladistics contrasted with traditional taxonomy

A highly resolved, automatically generated tree of life based on completely sequenced genomes^[22]

Prior to the advent of cladistics, most taxonomists used Linnaean taxonomy and later Evolutionary taxonomy to organize life forms. These traditional approaches, still in use by some researchers (especially in works intended for a more general audience^[23]) use several fixed levels of a hierarchy, such as kingdom, phylum, class, order, and family. Cladistics does not use those terms, because one of the fundamental premises of cladistics is that the evolutionary tree is so deep and so complex that it is inadvisable to set a fixed number of levels.

Evolutionary taxonomy insists that groups reflect phylogenies. In contrast, Linnean taxonomy allows both monophyletic and paraphyletic groups as taxa. Since the early 20th century, Linnaean taxonomists have generally attempted to make at least family- and lower-level taxa (i.e. those regulated by the codes of nomenclature) monophyletic. Ernst Mayr drew a distinction between the terms cladistics and phylogeny, using the term cladistics to refer to classifications which only take into account genealogy, as opposed to phylogeny, which had previously been used in a broader sense to refer to the combination of genealogy and amount of divergence from an ancestor (i.e. Evolutionary taxonomy). Mayr wrote, in 1985:

It would seem to me to be quite evident that the two concepts of phylogeny (and their role in the construction of classifications) are sufficiently different to require terminological distinction. The term phylogeny should be retained for the broad concept of phylogeny, promoted by Darwin and adopted by most students of phylogeny in the ensuing 90 years. The concept of phylogeny as mere genealogy should be terminologically distinguished as cladistics. To lump the two concepts together terminologically could not help but produce harmful equivocation.

—^[24]

Willi Hennig's pioneering work provoked a spirited debate^[25] about the relative merits of cladistics versus traditional taxonomy which has continued down to the present.^[26] Some of the debates that the cladists engaged in had been running since the 19th century, but they entered these debates with a new fervor,^[27] as can be seen from the Foreword to Hennig (1979) by Rosen, Nelson, and Patterson:

Encumbered with vague and slippery ideas about adaptation, fitness, biological species and natural selection, neo-Darwinism (summed up in the "evolutionary" systematics of Mayr and Simpson) not only lacked a definable investigatory method, but came to depend, both for evolutionary interpretation and classification, on consensus or authority.

—Foreword, page ix

Cladistics strictly and exclusively follows phylogeny and has arbitrarily deep trees with binary branching: each taxon corresponds to a clade. Linnaean taxonomy, while since the advent of evolutionary theory following phylogeny, also may subjectively consider similarity and has a fixed hierarchy of taxonomic ranks, and its taxa are not required to correspond to clades.

[edit] Paraphyletic groups discouraged

Many cladists discourage the use of paraphyletic groups in classification of organisms, because they detract from cladistics' emphasis on clades (monophyletic groups). In contrast, proponents of the use of paraphyletic groups argue that any dividing line in a cladogram creates both a monophyletic section above and a paraphyletic section below. They also contend that paraphyletic taxa are necessary for classifying earlier sections of the tree – for instance, the early vertebrates that would someday evolve into the family Hominidae cannot be placed in any other monophyletic family. They also argue that paraphyletic taxa provide information about significant changes in organisms' morphology, ecology, or life history – in short, that both paraphyletic groups and clades are valuable notions with separate purposes.

[edit] Complexity of the Tree of Life

One argument in favor of cladistics is that it supports arbitrarily complex, arbitrarily deep trees. Especially when extinct species are considered (both known and unknown), the complexity and depth of the tree can be very large. Every single speciation event, including all the species that are now extinct, represents an additional fork on the hypothetical, complete cladogram representing the full tree of life. Fractals can be used to represent this notion of increasing detail: as a viewpoint zooms into the tree of life, the complexity remains virtually constant^[28]. This great complexity of the tree, and the uncertainty associated with the complexity, are among the reasons that cladists cite for the attractiveness of cladistics over traditional taxonomy.

Proponents of noncladistic approaches to taxonomy point to punctuated equilibrium to bolster the case that the tree of life has a finite depth and finite complexity.^{[citation needed]} If the number of species currently alive is finite, and the number of extinct species that we will ever know about is finite, then the depth and complexity of the tree of life is bounded, and there is no need to handle arbitrarily deep trees.

[edit] PhyloCode approach to naming species

A formal code of phylogenetic nomenclature, the PhyloCode^[29], is currently under development for cladistic taxonomy. It is intended for use by both those who would like to abandon Linnaean taxonomy and those who would like to use taxa and clades side by side. In several instances (see for example Hesperornithes) it has been employed to clarify uncertainties in Linnaean systematics so that in combination they yield a taxonomy that unambiguously places problematic groups in the evolutionary tree in a way that is consistent with current knowledge.

[edit] Example

For example, Linnaean taxonomy contains the taxon Tetrapoda, defined morphologically as vertebrates with four limbs (as well as animals with four-limbed ancestors, such as snakes), which is often given the rank of superclass, and divides into the classes Amphibia, Reptilia, Aves, Mammalia, and some extinct families.

Cladistics also contains the taxon Tetrapoda, whose living members can be classified phylogenically as "the clade defined by the common ancestor of amphibians and mammals", or more precisely the clade defined by the common ancestor of a specific amphibian and mammal (or bird or reptile), but whose tree is still being worked out (there are a number of extinct branches). The taxon does not have a rank, and its subtaxa are subclades: these can be contained within one another, but one does not divide the clade into several non-overlapping taxa (as in traditional taxonomy): one can split into two clades at the first branching, but that is all. With regards to the traditional classes, Aves and Mammalia are subclades, contained in the subclade Amniota, but Reptilia* is a paraphyletic taxon, not a clade — "At best, the cladists suggest, we could say that the traditional Reptilia are "non-avian, non-mammalian amniotes"^[30] — and instead one divides Amniota into the two clades Sauropsida (which contains birds and all living amniotes other than mammals, including all living traditional reptiles) and Theropsida (mammals and the extinct "mammal-like reptiles"). Similarly, Amphibia* is a paraphyletic taxon.

[edit] Summary of advantages of cladistics

Proponents of cladistics enumerate key distinctions between cladistics and Linnaean taxonomy as follows:^[31]

[edit] Summary of criticisms of cladistics

Critics of cladistics include Ashlock,^[32] Mayr,^[33] Williams^[34]. Some of their criticisms include:

[edit] Process to generate a cladogram

It has been suggested that this section be split into a new article titled Cladogram. (Discuss)

Unrooted cladogram of the myosin supergene family^[35]

A simplified procedure for generating a cladogram is:^[36]

1. Gather and organize data
2. Consider possible cladograms
3. Select best cladogram

[edit] Step 1

A cladistic analysis begins with the following data:

• a list of species to be organized
• a list of characteristics to be compared
• for each species, the value of each of the listed characteristics or character states

For example, if analyzing 20 species of birds, the data might be:

• the list of 20 species
• characteristics such as genome sequence, skeletal anatomy, biochemical processes, and feather coloration
• for each of the 20 species, its particular genome sequence, skeletal anatomy, biochemical processes, and feather coloration

[edit] Molecular versus morphological data

The characteristics used to create a cladogram can be roughly categorized as either morphological (synapsid skull, warm blooded, notochord, unicellular, etc.) or molecular (DNA, RNA, or other genetic information).^[36] Prior to the advent of DNA sequencing, all cladistic analysis used morphological data.

As DNA sequencing has become cheaper and easier, molecular systematics has become a more and more popular way to reconstruct phylogenies.^[37] Using a parsimony criterion is only one of several methods to infer a phylogeny from molecular data; maximum likelihood and Bayesian inference, which incorporate explicit models of sequence evolution, are non-Hennigian ways to evaluate sequence data. Another powerful method of reconstructing phylogenies is the use of genomic retrotransposon markers, which are thought to be less prone to the problem of reversion that plagues sequence data. They are also generally assumed to have a low incidence of homoplasies because it was once thought that their integration into the genome was entirely random; this seems at least sometimes not to be the case, however.

Ideally, morphological, molecular, and possibly other phylogenies should be combined into an analysis of total evidence: All have different intrinsic sources of error. For example, character convergence (homoplasy) is much more common in morphological data than in molecular sequence data, but character reversions that are unrecognizable as such are more common in the latter (see long branch attraction). Morphological homoplasies can usually be recognized as such if character states are defined with enough attention to detail.

[edit] Plesiomorphies and synapomorphies

The researcher must decide which character states were present before the last common ancestor of the species group (plesiomorphies) and which were present in the last common ancestor (synapomorphies) and does so by comparison to one or more outgroups. The choice of an outgroup is a crucial step in cladistic analysis because different outgroups can produce trees with profoundly different topologies. Note that only synapomorphies are of use in characterizing clades.^{[citation needed]}

[edit] Avoid homoplasies

A homoplasy is a character that is shared by multiple species due to some cause other than common ancestry.^[38] Typically, homoplasies occur due to convergent evolution. Use of homoplasies when building a cladogram is sometimes unavoidable but is to be avoided when possible.

A well known example of homoplasy due to convergent evolution would be the character, "presence of wings". Though the wings of birds, bats, and insects serve the same function, each evolved independently, as can be seen by their anatomy. If a bird, bat, and a winged insect were scored for the character, "presence of wings", a homoplasy would be introduced into the dataset, and this would confound the analysis, possibly resulting in a false evolutionary scenario.^{[citation needed]}

Homoplasies can often be avoided outright in morphological datasets by defining characters more precisely and increasing their number. When analyzing "supertrees" (datasets incorporating as many taxa of a suspected clade as possible), it may become unavoidable to introduce character definitions that are imprecise, as otherwise the characters might not apply at all to a large number of taxa; to continue with the "wings" example, the presence of wings would hardly be a useful character if attempting a phylogeny of all Metazoa, as most of these don't have wings at all. Cautious choice and definition of characters thus is another important element in cladistic analyses. With a faulty outgroup or character set, no method of evaluation is likely to produce a phylogeny representing the evolutionary reality.^{[citation needed]}

[edit] Step 2

When there are just a few species being organized, it is possible to do this step manually, but most cases require a computer program. There are scores of computer programs available to support cladistics.^[39] See phylogenetic tree for more information about tree-generating computer programs.

Because the total number of possible cladograms grows exponentially with the number of species, it is impractical for a computer program to evaluate every individual cladogram. A typical cladistic program begins by using heuristic techniques to identify a small number of candidate cladograms. Many cladistic programs then continue the search with the following repetitive steps:

1. Evaluate the candidate cladograms by comparing them to the characteristic data
2. Identify the best candidates that are most consistent with the characteristic data
3. Create additional candidates by creating several variants of each of the best candidates from the prior step
4. Use heuristics to create several new candidate cladograms unrelated to the prior candidates
5. Repeat these steps until the cladograms stop getting better

Computer programs that generate cladograms use algorithms that are very computationally intensive,^[40] because the cladogram problem is NP-hard.

[edit] Step 3

There are several algorithms available to identify the "best" cladogram.^[41] Most algorithms use a metric to measure how consistent a candidate cladogram is with the data. Most cladogram algorithms use the mathematical techniques of optimization and minimization.

In general, cladogram generation algorithms must be implemented as computer programs, although some algorithms can be performed manually when the data sets are trivial (for example, just a few species and a couple of characteristics).

Some algorithms are useful only when the characteristic data are molecular (DNA, RNA); other algorithms are useful only when the characteristic data are morphological. Other algorithms can be used when the characteristic data includes both molecular and morphological data.

Algorithms for cladograms include least squares, neighbor-joining, parsimony, maximum likelihood, and Bayesian inference.

Biologists sometimes use the term parsimony for a specific kind of cladogram generation algorithm and sometimes as an umbrella term for all cladogram algorithms.^[42]

Algorithms that perform optimization tasks (such as building cladograms) can be sensitive to the order in which the input data (the list of species and their characteristics) is presented. Inputting the data in various orders can cause the same algorithm to produce different "best" cladograms. In these situations, the user should input the data in various orders and compare the results.

Using different algorithms on a single data set can sometimes yield different "best" cladograms, because each algorithm may have a unique definition of what is "best".

Because of the astronomical number of possible cladograms, algorithms cannot guarantee that the solution is the overall best solution. A nonoptimal cladogram will be selected if the program settles on a local minimum rather than the desired global minimum.^[43] To help solve this problem, many cladogram algorithms use a simulated annealing approach to increase the likelihood that the selected cladogram is the optimal one.^[44]

A triple family tree of Linux distributions.

[edit] Application to other disciplines

The processes used to generate cladograms are not limited to the field of biology^[45]. The generic nature of cladistics means that cladistics can be used to organize groups of items in many different academic realms. The only requirement is that the items have characteristics that can be identified and measured.

Recent attempts in the use of cladistic methods outside of biology attack problems in:

• anthropology and archeology^[46];
• languages;^[47]
• the filiation of manuscripts in textual criticism, usually called stemma,^[48][49] and
• the lineage of Linux distros, a class of computer operating system.^[50]
• Psychology
• In Mathematics and statistics (under the name of "additive trees")

[edit] See also

[edit] References

[edit] Notes

[edit] Bibliography

[edit] External links

Listen to this article (info/dl)

This audio file was created from a revision dated 2005-04-30, and does not reflect subsequent edits to the article. (Audio help)

More spoken articles

• The Compleat Cladist (pdf)
• Tree of Life illustration - A high-level cladogram showing the complete tree of life.
• Example of cladistics used in textual criticism
• Journey into Phylogenetic Systematics
• Phylogenetics Primer from Talk.Origins
• Willi Hennig Society
• Cladistics: The International Journal of the Willi Hennig Society (ISSN 0748-3007)
• Phylogenetic inferring on the T-REX server
• A list of cladogram-generating programs
• For a cladistic approach to animal classification: Classification of living things