| advertise add site services publishers database health videos | ![]() | about toolbar stats live show health store more stuff JOIN/LOGIN |
JSSM- 2006, Vol.5, Issue 2, 208 - 214 jssm.org | 214-American Diagnostic Corporation adctoday.com | Stemride>Origins of SI-214 stemride.com |
The Bell 214 is a medium-lift helicopter derived from Bell Helicopter's ubiquitous UH-1 Huey series. The Bell 214ST shares the same model number, but is a larger, much-modified twin-engined derivative.
[edit] Design and developmentThe original development of the Model 214 was announced by Bell in 1970 under the name "Huey Plus". The first prototype was based on a Bell 205 airframe equipped with a Lycoming TS3 engine of 1,900 shp.[1] The first 214A demonstration prototype followed and was evaluated in Iran during field exercises with the Iranian Armed Forces. The trial was judged successful and an order for 287 214A helicopters followed. The intention was that these aircraft would be constructed by Bell in their Dallas-Fort Worth facility and that a further 50 214As and 350 Bell 214ST helicopters would then be built in Iran. In the event 296 214A models and 39 214C models were delivered, before the Iranian Revolution ended the plans for Iranian production.[1] Similar in size and appearance to the Bell 205 and Bell 212, the Bell 214 uses a single, more powerful Lycoming LTC4B-8 engine (2,930 shp / 2,185 kW) and upgraded rotor system giving it a high lifting capacity and good performance at high temperatures and high altitudes.[2] It can be identified by the single large exhaust duct and wide chord rotor blades without stabilizer bars. Bell offered the Bell 214B "BigLifter" for civil use.[2] It received certification in 1976. A total of 104 214Bs were produced until 1981. Powered by a 2,930 shp (2,183 kW) Lycoming T5508D turboshaft, it has the same rotor drive and transmission system as the 214A. The transmission is rated at 2,050 shp (1,528 kW) for take-off, with a maximum continuous power rating of 1,850 shp (1,379 kW). The BigLifter features advanced rotor hub with elastomeric bearings; an automatic flight control system with stability augmentation; and commercial avionics.[3] [edit] Variants
[edit] Operational historyAn estimated 50 Bell 215As and 25 Bell 214Cs were in Iranian service as of January 2009.[6] The overhaul facility set up at the time of delivery, the Iran Helicopter Support & Renewal Company, is now able to do major rebuilds that could be considered manufacture of new machines. Approximately 27 Bell 214Bs are still flying in commercial service where the hook lifting capacity of 8,000 lb suits them for fire fighting, logging, and similar crane work. User countries are Australia (3), Canada (8), France (1), Korea (8), Norway (2), Singapore (3), and United States (?). [edit] Operators[edit] Military operators
[edit] Civil operators
[edit] Specifications (214A)Data from The International Directory of Civil Aircraft[11] General characteristics
Performance
[edit] See alsoRelated development Comparable aircraft [edit] References
[edit] External links
| |||||||||||||||||||||||||||||||||||||||||||||||
| ↑ top of page ↑ | about thumbshots |