An architect's scale is a specialized ruler. It is used in making or measuring from reduced scale drawings, such as blueprints and floor plans. It is marked with a range of calibrated scales (ratios).

For accuracy and longevity the material used should be dimensionally stable and durable. Scales were traditionally made of wood, but today they are usually made of rigid plastic or aluminium. Architect's scales may be flat, with 4 scales, or have a symmetric 3-lobed cross-section, with 6 scales.

Contents 1 Metric units 2 United States and Imperial units 3 See also 4 External links

[edit] Metric units

Architect's scale rulers used in Britain and other metric areas are marked with ratios without reference to a base unit. Therefore a drawing will indicate both its scale and the unit of measurement being used.

In Britain, the standard units used on architectural drawings are the (SI) units millimetres (mm) and metres (m), whereas in France centimetres (cm) and metres are most often used.

In Britain, for flat rulers, the paired scales often found on architect's scales are:

• 1:1/1:100

• 1:5/1:50

• 1:10/1:100

• 1:20/1:200

• 1:1250/1:2500

For triangular rulers, the paired scales are:

• 1:1/1:10

• 1:2/1:20

• 1:5/1:50

• 1:100/1:200

• 1:500/1:1000

• 1:1250/1:2500

[edit] United States and Imperial units

In the United States, and prior to metrification in Britain, Canada and Australia, architect's scales are/were marked as a ratio of x inches-to-the-foot (typically written as x"=1'-0"). For example one inch measured from a drawing with a scale of "one-inch-to-the-foot" is equivalent to one foot in the real world (a scale of 1:12) whereas one inch measured from a drawing with a scale of "two-inches-to-the-foot" is equivalent to six inches in the real world (a scale of 1:6). It is not to be confused with a true unitless ratio (inches to inches)-- a 1:50 architectural scale would be a 1:60 unitless scale.

Typical scales used in the United States are:

• Full scale, with inches divided into sixteenths of an inch

The following scales are generally grouped in pairs using the same dual-numbered index line:

• three-inches-to-the-foot (3"=1'-0") (ratio equivalent 1:4)/one-and-one-half-inch-to-the-foot (1-1/2"=1'-0") (1:8)

• one-inch-to-the-foot (1"=1'-0") (1:12)/one-half-inch-to-the-foot (1/2"=1'-0") (1:24)

• three-quarters-inch-to-the-foot (3/4"=1'-0") (1:16)/three-eighths-inch-to-the-foot (3/8"=1'-0") (1:32)

• one-quarter-inch-to-the-foot (1/4"=1'-0") (1:48)/one-eighth-inch-to-the-foot (1/8"=1'-0") (1:96)

• three-sixteenths-inch-to-the-foot (3/16"=1'-0") (1:64)/three-thirty-seconds-inch-to-the-foot (3/32"=1'0") (1:128)

[edit] See also

• Engineer's scale

[edit] External links

• Engineering and Architectural Scale Information.