Algaculture is a form of aquaculture involving the farming of species of algae.

The majority of algae that are intentionally cultivated fall into the category of microalgae (also referred to as phytoplankton, microphytes, or planktonic algae). Macroalgae, commonly known as seaweed, also have many commercial and industrial uses, but due to their size and the specific requirements of the environment in which they need to grow, they do not lend themselves as readily to cultivation.

Commercial and industrial algae cultivation has numerous uses, including production of food ingredients, food, fertilizer, bioplastics, dyes and colorants, chemical feedstock, pharmaceuticals, and algal fuel, and can also be used as a means of pollution control.

Contents 1 Growing, harvesting, and processing algae 1.1 Monoculture 1.2 Growing algae 1.2.1 Temperature 1.2.2 Light And Mixing 1.2.3 Odor and Oxygen 1.2.4 Nutrients 1.2.5 Pond and bioreactor cultivation methods 1.2.5.1 Open-ponds 1.2.5.2 Photobioreactors 1.3 Harvesting 1.4 Oil Extraction 1.4.1 Physical extraction 1.4.2 Chemical extraction 2 Algal Culture Collections 3 Uses of algae 3.1 Food 3.2 Fertilizer and agar 3.3 Pollution Control 3.4 Energy production 3.5 Other uses 4 See also 5 References 6 External links

[edit] Growing, harvesting, and processing algae

[edit] Monoculture

Most growers prefer monocultural production and go to considerable lengths to maintain the purity of their cultures. With mixed cultures, one species comes to dominate over time and if a non-dominant species is believed to have particular value, it is necessary to obtain pure cultures in order to cultivate this species. Individual species cultures are also needed for research purposes.

A common method of obtaining pure cultures is serial dilution. Cultivators dilute a wild sample or a lab sample containing the desired algae with filtered water and introduce small aliquots into a large number of small growing containers. Dilution follows a microscopic examination of the source culture that predicts that a few of the growing containers contain a single cell of the desired species. Following a suitable period on a light table, cultivators again use the microscope to identify containers to start larger cultures.

Alternatively, mixed algae cultures can work well for larval mollusks. First, the cultivator filters the sea water to remove algae which are too large for the larvae to eat. Next, the cultivator adds nutrients and possibly aerates the result. After one or two days in a greenhouse or outdoors, the resulting thin soup of mixed algae is ready for the larvae. An advantage of this method is low maintenance.

[edit] Growing algae

Water, carbon dioxide, minerals and light are all important factors in cultivation, and different algae have different requirements. The basic reaction in water is carbon dioxide + light energy = glucose + oxygen ^[1].

[edit] Temperature

The water must be in a temperature range that will support the specific algal species being grown.

[edit] Light And Mixing

In most algal-cultivation systems, light only penetrates the top 3 to 4 inches (76–100 mm) of the water. As the algae grow and multiply, the culture becomes so dense that it blocks light from reaching deeper into the water. Direct sunlight is too strong for most algae, which need only about ¹⁄₁₀ the amount of light they receive from direct sunlight.

To use deeper ponds, growers agitate the water, circulating the algae so that it does not remain on the surface. Paddle wheels can stir the water and compressed air coming from the bottom lifts algae from the lower regions. Agitation also helps prevent over-exposure to the sun.

Another means of supplying light is to place the light in the system. Glow plates made from sheets of plastic or glass and placed within the tank offer precise control over light intensity.

[edit] Odor and Oxygen

The odor associated with bogs, swamps, indeed any stagnant waters, can be due to oxygen depletion caused by the decay of deceased algal blooms. Under anoxic conditions, the bacteria inhabiting algae cultures break down the organic material and produce hydrogen sulfide and ammonia which causes the odor. This hypoxia often results in the death of aquatic animals. In a system where algae is intentionally cultivated, maintained, and harvested, neither eutrophication nor hypoxia are likely to occur.

Some living algae also produce odorous chemicals, particularly certain blue-green algae (cyanobacteria) such as Anabaena. The most well-known of these odor-causing chemicals are MIB (2-methylisoborneol) and geosmin. They give a musty or earthy odor that can be quite strong. Eventual death of the cyanobacteria releases additional gas that is trapped in the cells. These chemicals are detectable at very low levels, in the parts per billion range, and are responsible for many "taste and odor" issues in drinking water treatment and distribution.^[2]. Cyanobacteria can also produce chemical toxins that have been a problem in drinking water.

[edit] Nutrients

Nutrients can accelerate growth, but excess nutrients go to waste.

[edit] Pond and bioreactor cultivation methods

Algae can be cultured in open-ponds (such as raceway-type ponds and lakes) and photobioreactors. Raceway ponds may be less expensive.^{[citation needed]}

[edit] Open-ponds

Raceway-type ponds and lakes are open to the elements. Open ponds are highly vulnerable to contamination by other microorganisms, such as other algal species or bacteria. Thus cultivators usually choose closed systems for monocultures. Open systems also do not offer control over temperature and lighting. The growing season is largely dependent on location and, aside from tropical areas, is limited to the warmer months.

Open pond systems are cheaper to construct, at the minimum requiring only a trench or pond. Large ponds have the largest production capacities relative to other systems of comparable cost. Also, open pond cultivation can exploit unusual conditions that suit only specific algae. For instance, Spirulina sp. thrives in water with a high concentration of sodium bicarbonate and Dunaliela salina grow in extremely salty water. Open culture can also work if there is a system of culling the desired algae and inoculating new ponds with a high starting concentration of the desired algae.

Some chain diatoms fall into this category since they can be filtered from a stream of water flowing through an outflow pipe. A "pillow case" of a fine mesh cloth is tied over the outflow pipe allowing other algae to escape. The chain diatoms are held in the bag and feed shrimp larvae (in Eastern hatcheries) and inoculate new tanks or ponds.

Enclosing a pond with a transparent or translucent barrier effectively turns it into a greenhouse. This solves many of the problems associated with an open system. It allows more species to be grown; it allows the species that are being grown to stay dominant; and it extends the growing season – and if heated the pond can produce year round.

[edit] Photobioreactors

Algae can also be grown in a photobioreactor (PBR). A PBR is a bioreactor which incorporates a light source. Virtually any translucent container could be called a PBR, however the term is more commonly used to define a closed system, as opposed to an open tank or pond.

Because PBR systems are closed, the cultivator must provide all nutrients, including CO₂.

A PBR can operate in "batch mode", which involves restocking the reactor after each harvest, but it is also possible to grow and harvest continuously. Continuous operation requires precise control of all elements to prevent immediate collapse. The grower provides sterilized water, nutrients, air, and carbon dioxide at the correct rates. This allows the reactor to operate for long periods. An advantage is that algae that grows in the "log phase" is generally of higher nutrient content than old "senescent" algae. Maximum productivity occurs when the "exchange rate" (time to exchange one volume of liquid) is equal to the "doubling time" (in mass or volume) of the algae.

Different types of PBRs include:

• tanks
• Polyethylene sleeves or bags
• Glass or plastic tubes.

[edit] Harvesting

Algae can be harvested using microscreens, by centrifugation, by flocculation.^[3] and by froth flotation.

Interrupting the carbon dioxide supply can cause algae to flocculate on its own, which is called "autoflocculation".

"Chitosan", a commercial flocculant, more commonly used for water purification, is far more expensive. The powdered shells of crustaceans are processed to acquire chitin, a polysaccharide found in the shells, from which chitosan is derived via de-acetylation. Water that is more brackish, or saline requires larger amounts of flocculant. Flocculation is often too expensive for large operations.

Alum and ferric chloride are other chemical flocculants.

In froth flotation, the cultivator aerates the water into a froth, and then skims the algae from the top.^[4]

Ultrasound and other harvesting methods are currently under development.^[5][6][7]

[edit] Oil Extraction

Algae oils have a variety of commercial and industrial uses, and are extracted through a wide variety of methods. Estimates of the cost to extract oil from microalgae vary, but are likely to be around $1.80 (US$)/kg (compared to $0.50 (US$)/kg for palm oil).^[8]

[edit] Physical extraction

In the first step of extraction, the oil must be separated from the rest of the algae. The simplest method is mechanical crushing. When algae is dried it retains its oil content, which then can be "pressed" out with an oil press. Many commercial manufacturers of vegetable oil use a combination of mechanical pressing and chemical solvents in extracting oil. Since different strains of algae vary widely in their physical attributes, various press configurations (screw, expeller, piston, etc) work better for specific algae types. Often, mechanical crushing is used in conjunction with chemical solvents, as described below.

Osmotic shock is a sudden reduction in osmotic pressure, this can cause cells in a solution to rupture. Osmotic shock is sometimes used to release cellular components, such as oil.

Ultrasonic extraction, a branch of sonochemistry, can greatly accelerate extraction processes. Using an ultrasonic reactor, ultrasonic waves are used to create cavitation bubbles in a solvent material. When these bubbles collapse near the cell walls, the resulting shock waves and liquid jets cause those cells walls to break and release their contents into a solvent.^[9] Ultrasonication can enhance basic enzymatic extraction. The combination "sonoenzymatic treatment" accelerates extraction and increases yields. ^[10]

[edit] Chemical extraction

Chemical solvents are often used in the extraction of the oils. The downside to using solvents for oil extraction are the dangers involved in working with the chemicals. Care must be taken to avoid exposure to vapors and skin contact, either of which can cause serious health damage. Chemical solvents also present an explosion hazard.^[11]

A common choice of chemical solvent is hexane, which is widely used in the food industry and is relatively inexpensive. Benzene and ether can also separate oil. Benzene is classified as a carcinogen.

Another method of chemical solvent extraction is Soxhlet extraction. In this method, oils from the algae are extracted through repeated washing, or percolation, with an organic solvent such as hexane or petroleum ether, under reflux in a special glassware.^[12] The value of this technique is that the solvent is reused for each cycle.

Enzymatic extraction uses enzymes to degrade the cell walls with water acting as the solvent. This makes fractionation of the oil much easier. The costs of this extraction process are estimated to be much greater than hexane extraction.^[13] The enzymatic extraction can be supported by ultrasonication. The combination "sonoenzymatic treatment" causes faster extraction and higher oil yields. ^[10]

Supercritical CO₂ can also be used as a solvent. In this method, CO₂ is liquefied under pressure and heated to the point that it becomes supercritical (having properties of both a liquid and a gas), allowing it to act as a solvent.^[14][15]

Other methods are still being developed, including ones to extract specific types of oils, such as those with a high production of long-chain highly unsaturated fatty acids.^[5][6]

[edit] Algal Culture Collections

Specific algal strains can be acquired from algal culture collections, with over 500 culture collections registered with the World Federation for Culture Collections.^[16]

[edit] Uses of algae

[edit] Food

Several species of algae are raised for food.

• Purple laver (Porphyra) is perhaps the most widely domesticated marine algea.^[17] In Asia it is used in nori (Japan) and gim (Korea). In Wales, it is used in laverbread, a traditional food, and in Ireland it is collected and made into a jelly by stewing or boiling. Preparation also can involve frying or heating the fronds with a little water and beating with a fork to produce a pinkish jelly. Harvesting also occurs along the west coast of North America, and in Hawaii and New Zealand.

• Dulse (Palmaria palmata) is a red species sold in Ireland and Atlantic Canada. It is eaten raw, fresh, dried, or cooked like spinach.

• Spirulina (Arthrospira platensis ) is a blue-green microalgae with a long history as a food source in East Africa and pre-colonial Mexico. Spirulina is high in protein and other nutrients, finding use as a food supplement and for malnutrition. Spirulina thrives in open systems and commercial growers have found it well-suited to cultivation. One of the largest production sites is Lake Texcoco in central Mexico.^[18] The plants produce a variety of nutrients and high amounts of protein. Spirulina is often used commercially as a nutritional supplement.^[19][20]

• Chlorella, another popular microalgae, has similar nutrition to spirulina. Chlorella is very popular in Japan. It is also used as a nutritional supplement with possible effects on metabolic rate.^[21] Some allege that Chlorella can reduce mercury levels in humans (supposedly by chelation of the mercury to the cell wall of the organism).^[22]

• Irish moss (Chondrus crispus), often confused with Mastocarpus stellatus, is the source of carrageenan, which is used as a stiffening agent in instant puddings, sauces, and dairy products such as ice cream. Irish moss is also used by beer brewers as a fining agent.

• Sea lettuce (Ulva lactuca), is used in Scotland where it is added to soups and salads. Dabberlocks or badderlocks (Alaria esculenta) is eaten either fresh or cooked in Greenland, Iceland, Scotland and Ireland.

• Aphanizomenon flos-aquae is a cyanobacteria similar to spirulina, which is used as a nutitional supplement.

• Extracts and oils from algae are also used as additives in various food products.^[23] The plants also produce Omega-3 and Omega-6 fatty acids, which are commonly found in fish oils, and which have been shown to have positive health benefits.^[24]

[edit] Fertilizer and agar

For centuries seaweed has been used as fertilizer. It is also an excellent source of potassium for manufacture of potash and potassium nitrate.

Both microalgae and macroalgae are used to make agar.^[25][26][27]

[edit] Pollution Control

With concern over global warming, new methods for the thorough and efficient capture of CO₂ are being sought out. The carbon dioxide that a carbon-fuel burning plant produces can feed into open or closed algae systems, fixing the CO₂ and accelerating algae growth. Untreated sewage can supply additional nutrients, thus turning two pollutants into valuable commodities.^[28]

Algae cultivation is under study for uranium/plutonium sequestration and purifying fertilizer runoff.

[edit] Energy production

Business, academia and governments are exploring the possibility of using algae to make gasoline, diesel and other fuels. See Algae fuel.

[edit] Other uses

Chlorella, particularly a transgenic strain which carries an extra mercury reductase gene, has been studied as an agent for environmental remediation due to its ability to reduce Hg²⁺ to the less toxic elemental mercury. ^[29]

Cultivated algae serve many other purposes, including bioplastic production, dyes and colorant production, chemical feedstock production, and pharmaceutical ingredients.

[edit] See also

• Agar
• Algal bloom
• Algal nutrient solutions
• Aquatic Species Program
• Biological hydrogen production (Algae)
• Biofuel
• Bio Fuel Systems
• Biotechnology
• Carbon sequestering
• Carrageenan
• Green crude
• Photobioreactor
• SERI microalgae culture collection

[edit] References

[edit] External links

• Algaculture at the Open Directory Project
• www.sas.org How to Rear a Plankton Menagerie (home grow micro algae in soda bottles)
• io.uwinnipeg.ca breeding algae in batch and continuous flow systems on small scale
• Making Algae Grow
• www.unu.edu Indian experience with algal ponds
• Photobioreactors : Scale-up and optimisation PhD thesis Wageningen UR.
• Research on algae within Wageningen UR
• Photobioreactor using polyethylene and chicken wire.
• Instructables.com - Simple Home Algae Culture and Breeding

v • d • e Aquaculture and fish farming articles Aquaculture Mariculture · Algaculture · Aquaponics · BAP · Integrated Multi-Trophic Aquaculture · Inland saline aquaculture · Raceway · Geothermal energy and aquaculture · Aquaculture engineering · Fish diseases and parasites · Fisheries and aquaculture research institutes Fish farming Broodstock · Fish hatchery · Fish stocking · Salmon · Tilapia · Catfish · Shrimp · Freshwater prawns · Oysters · Tailwater · Hirudiculture · US hatcheries By country Australia · China · New Zealand