Airy points are used to support a precision length standard in such a way as to minimize bending or droop. The points are symmetrically arranged around the centre of the length standard and are separated by a distance equal to 5/9ths of the total length of the beam.

Airy points are normally identified by inscribed marks or lines. For example, a 450 mm length gauge would have an Airy point separation of 450 mm times 5/9 = 250 mm. A line or pair of lines would be marked onto the gauge 100 mm in from each end. Supporting the artifact at these points ensures that the calibrated length is preserved. If the length gauge is not supported at the Airy points, the measurement uncertainty is increased.

[edit] See also

• George Biddell Airy
• History of measurement
• International Prototype Meter
• Test method
• Units of measurement
• Uncertainty in measurement
• Weights and measures

[edit] References

• Smith, S. T. and D. G. Chetwynd. 1994. Developments in Nanotechnology Vol. 2: Foundations of Ultraprecision Mechanism Design. Taylor & Francis. p. 323 of 364. ISBN 9782884490016
• Phelps, F. M. 1966. Airy Points of a Meter Bar. Amer. J. Physics 34(5): 419-422.

This science article is a stub. You can help Wikipedia by expanding it. v • d • e